![control panel only)](/images/new-backgrounds/57531/5753113x1.webp)
•The coffee will start to come out after a few seconds. It is completely normal for the appliance to release a little steam while the coffee is filtering.
•Models with glass jug: If you leave the ON/OFF button pressed after percolation has finished, the plate will keep the coffee at the ideal temperature. The unit automatically shuts off after two hours.
•Models with thermal jug: To pour the coffee, turn the lid to the position shown in (fig. 9). To completely remove the lid from the jug, turn it to the position shown in (fig. 10).
The appliance switches automatically off after brewing cycle.
Attention: Removing the jug before all the coffee is made does not interrupt production of the coffee, but merely blocks flow into the jug. If you want to pour out a little coffee immediately, you are recommended to do so as rapidly as possible in order to avoid the coffee overflowing in the filter holder.
Programming the automatic start (models with electronic
control panel only)
Make sure that the time is set correctly.
To program the time to start coffee preparation:
•Press the SET TIMER button and keep it pressed until you reach the desired
•Then release the SET TIMER button. The time will flash for a few seconds until set: then the display will show the current hour.
Activating the timer
After you have:
-Set the time for
-Prepare the machine for making coffee. Press the ON/AUTO/OFF button twice (fig. 11). The ON/AUTO indicator light changes to green indicating the coffee maker is in operation: the display shows AUTO.
Cleaning and maintenance
Before performing any cleaning or maintenance operations turn the machine off, unplug it from the power socket and allow it to cool down.
1.When cleaning the coffee maker, do not use solvents or abrasive detergents. A soft, damp cloth is sufficient.
2.Never immerse the coffee maker in water: it is an electrical appliance.
fig. 8
fig. 9
fig. 10
AM |
AUTO |
fig. 11
7 | Filter Coffee Maker |