As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the termi- nals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connect- ed to the terminal in the plug which is marked with the letter E or by the earth symbol 
or coloured green or green and yel- low.
The wire which is coloured blue must be connected to the ter- minal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the ter- minal which is marked with the letter L or coloured red.
When wiring the plug, ensure that all strands of wire are secure- ly retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a qualified electrician.
Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size. Only 13amp replacement fuses which are ASTA approved to B.S. 1362 should be fitted.
This appliance conforms to the Norms EN 55014 regarding the suppression of radio interference.
Kettle KBM 3011 | 8 |
|
