| Operating the coffee grinder | |
| • Ensure the coffee grinder is unplugged. Fit the ground | |
| coffee container and its lid in their correct position. Check that | |
| the assembly is correctly positioned in the body. | |
| • Remove the lid of the coffee bean hopper (fig. 1) and fill the bean | |
| hopper to the level desired (fig. 2). Do not fill above the | |
| “max.”level. Replace the lid and make certain that it is correctly | |
fig. 1 | positioned, pressing it down till the end (fig. 3). | |
Important: If the lid is not in the correct position the | ||
| ||
| grinder will not work. | |
| Please note: This product is designed to grind whole | |
| coffee beans only. |
| • |
| • |
fig. 2 | • |
| |
| • |
| • |
| • |
| • |
| • |
fig. 3
Set the quantity of ground coffee by positioning the cup selector dial (Fig. 4) according to the desired quantity.
Set the ground coffee coarseness level by adjusting the ground coffee coarseness dial (Fig. 5) to the desired level.
Insert the plug into an electrical socket.
Press the ON/OFF switch to start the appliance (Fig. 6).
Once the selected quantity has been ground, the appliance will stop automatically.
If you want to stop the appliance before grinding is complete, press ON/OFF switch.
The ground coffee is now ready for preparation.
To obtain additional ground coffee, repeat the operating cycle. Always first make sure that the ground coffee does not go above the “max.” level of the ground coffee container.
Please note: Selected settings will be retained from one use to the next.
Important
For your appliance to run correctly, make certain that:
-The lid to the
-The ground coffee container and its lid are correctly placed in the body of the appliance.
fig. 4
fig. 5 | fig. 6 |
Grinder KG79/89
6