I n s t a l l a t i o n
CHOOSING THE INSTALLATION SITE
Position the air conditioning unit on a flat surface where the air outlet grilles cannot be obstructed. Position the appliance at least 50 cm (19.7”) away from walls or obstacles.
INSTALLING THE AIR EXHAUST HOSE
1.Open out the end of the hose and screw the two adapters on counterclockwise (see figu- re).
2.Fit the square adapter on the air exhaust hose to the air exhaust outlet on the appliance.
3.Connect the other end (flange) to the neare- st window.
Important: the air exhaust hose must be between 500 mm (19.7”) and 2000 mm (78.7”) long. You are recommended to keep the air exhaust hose as short as possible.
During installation, keep the hose as horizontal as possible without distorting it. Do not con- nect the terminal to other exhaust ducts (flue
CABLE WINDER
Before installing the air exhaust hose, mount the two cable winder brackets using the screws supplied as shown in the figure.
or chimney) as this could lead to malfunction.
AIR EXHAUST ACCESSORIES
Correct wall installation: the hole must be at a height of between 40 cm (15.7”) and 130 cm (51.18”) from the floor.
9