TILTING CUTTINGHEAD FOR BEVEL CUTTING

DISCONNECT MACHINE FROM POWER SOURCE.

A

D

A

C

H B

Fig. 22

Fig. 23

IMPORTANT: Move the sliding fence to the left or right to provide clearance for the blade and guard. The DEGREE of tilt determines how far to move the sliding fence. Refer to the section “ADJUSTING SLIDING FENCE.”

1.The cuttinghead of your compound miter saw can be tilted to cut any bevel angle from a 90° straight cut-off to a 48° bevel angle left. Raise bevel lock lever (A) Fig. 22.

2.Positive stops (A) Fig. 23 are provided to rapidly position the saw blade at 0°, 33.9° and 45°. Refer to the section of this manual titled “ADJUSTING 0°, 33.9° AND 45° BEVEL POSITIVE STOPS.” The bevel angle of the cuttinghead is determined by the position of the pointer (B) on the scale (C).

3.In addition, a marked indicator (D) is provided on the bevel scale (33.9°) for cutting crown moulding. Refer to the “CUTTING CROWN MOULDING” section of this manual.

SELECTING 0°, 33.9°, AND 45° BEVEL POSITIVE STOPS

The bevel setting feature utilizes a sliding plate (A) Fig. 24, pin (B), and bushing (C) design that is used to select the bevel angle. The position of the pin (B) and the sliding plate (A) determine the bevel angle.

DISCONNECT THE MACHINE FROM THE POWER SOURCE.

1.Position the bevel detent plate so that the desired angle (A) Fig. 23 is exposed immediately to the left of the housing (H) Fig. 23.

2.Lift the front handle (A) Fig. 22 to disengage bevel lock.

3.Tilt the cuttinghead left as desired until it stops on plate (A) Fig. 23. NOTE: Fig. 25 illustrates the sliding plate positioned for 45° left.

4.Lower the front handle to engage the bevel lock.

NOTE: To perform a bevel cut of more than 45°, pull the bevel pin (B) out to bypass the bevel detent plate. 48° is possible.

A

C

B

Fig. 24

A

B

Fig. 25

Make sure that the fence is clear of the guard and blade before operating the saw.

ADJUSTING 0°, 33.9°, AND 45° BEVEL POSITIVE STOPS

The bevel adjustment utilizes a sliding plate (A) Fig. 24, pin (B), and bushing (C) design feature that can be adjusted to fine- adjust the bevel angle. The position of the pin within the bushing is adjustable and, when set, determines the bevel angle. To adjust, loosen the pin locking screws, move to desired location, and tighten securely.

10

Page 9 Page 11
Page 10
Image 10
Delta 36-312 instruction manual Tilting Cuttinghead for Bevel Cutting, Selecting 0, 33.9, and 45 Bevel Positive Stops
Page 9 Page 11

36-312 specifications

The Delta 36-312 is a table saw that has gained a reputation among woodworkers and DIY enthusiasts for its robust performance and high-quality construction. This tool is designed for both professionals and hobbyists looking to achieve precise cuts in various materials, making it a versatile addition to any workshop.

One of the standout features of the Delta 36-312 is its powerful 15-amp motor, which provides ample power for handling a wide range of cutting tasks. This motor allows the saw to maintain consistent speeds even when cutting through denser materials, ensuring smooth, uniform results every time.

The design of the Delta 36-312 includes a massive cast iron table, which offers stability and durability while reducing vibration during operation. At 40 inches in length, the table provides ample workspace for larger projects and facilitates easier handling of sizable sheets of plywood or lumber. The surface finish is meticulously polished, promoting easy gliding of materials during cuts.

Another significant feature of the Delta 36-312 is its advanced fence system. The Biesemeyer-style fence is designed for quick and accurate adjustments, allowing users to make precise cuts quickly. This fence can be locked securely in place, ensuring that it will not shift during use, which is crucial for maintaining cutting accuracy.

The saw also integrates a riving knife technology that enhances safety by reducing the risk of kickback. This feature allows for smoother operation and is an essential aspect of modern table saw design. In addition, the saw includes a dust collection system that helps maintain a cleaner workspace by minimizing sawdust during operation.

For ease of transport and maneuverability, the Delta 36-312 is equipped with sturdy wheels, allowing it to be easily moved around the workshop or stored away when not in use. The assembly process is relatively straightforward, with most components easily fitting together without the need for specialized tools.

Overall, the Delta 36-312 represents a blend of power, precision, and safety features that cater to a wide range of woodworking needs. Its combination of a powerful motor, stable table, advanced fence system, and safety technologies makes it a standout choice for anyone serious about woodworking, whether they are professionals or hobbyists seeking to elevate their craft.
Top Page Image Contents