Delta 50-760 OPERATION, TROUBLESHOOTING GUIDE

FOR OPERATOR SAFETY, DO NOT OPERATE THE MACHINE WITH ANY DUST INTAKE HOLES

UNCOVERED. THE ROTATINGFAN LOCATED INSIDE THE BLOWER HOUSING IS ACCESSIBLE THROUGH THE

DUST IN-TAKEPORT AND CANBE HAZARDOUS. ALWAYS WEARPROPER APPAREL. DONOT WEAR JEWELRY

AND KEEP FINGERS AND ALL FOREIGN OBJECTS OUT OF THE DUST INTAKE PORT. FOLLOW THE SAFETY

RULES IN THISMANUAL.

Fig. 14

Fig. 15

OPERATION

TROUBLESHOOTING GUIDE

For assistance with your tool, visit our website at www.deltamachinery.comfor a list of service centers or call the

DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).

1. The on/off switch (A) Fig. 14 is located on the motor

housing. To turn the machine “ON”,move the switch up

to the “ON” position.

2. To turn the machine “OFF”, move the switch (A)

down to the “OFF” position.

MAKE SURE THAT THE SWITCH IS IN

THE “OFF” POSITION BEFORE

PLUGGING IN THE POWER CORD. IN THE EVENT OF A

POWER FAILURE, MOVE THE SWITCH TO THE “OFF”

POSITION. AN ACCIDENTAL START-UP CAN CAUSE

INJURY.

IMPORTANT: When the tool is not in use, the switch

should be locked in the “OFF” position to prevent

unauthorized use. To lock the machine, grasp the

switch toggle (A) Fig. 15 and pull it out of the switch (B).

With the switch toggle (A) removed, the switch will not

operate. However, should the switch toggle be removed

while the saw is running, the machine can be turned

“OFF,”but cannot be restarted without re-inserting the

switch toggle (A).

WHEN USING THIS DUST COLLECTOR, DO NOT PICK UP ANYTHING THAT IS BURNING,

SMOLDERING OR SMOKING, SUCH AS MATCHES, CIGARETTES, OR HOT ASHES.

DO NOT USE TO VACUUM COMBUSTIBLE EXPLOSIVE MATERIALS, SUCH AS COAL, GRAIN

OR OTHER FINELY DIVIDED COMBUSTIBLE MATERIAL.

DO NOT USE TO VACUUM HAZARDOUS, TOXIC, OR CARCINOGENIC MATERIALS SUCH AS

ASBESTOS, PESTICIDE OR LEAD-BASED PAINT DEBRIS.