![SMT Power Inductor](/images/new-backgrounds/119895/1198951x1.webp)
SMT Power Inductor
HMR1042B, 1045, 1050, 1055 & 1075B Type
Features
RoHS compliant.
Low profile, SMD type.
High current.
Magnetic shielded.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits,
inductor applications. |
| ||
In | addition to | the standard | versions shown here, customized inductors |
are | available | to meet your | exact requirements. |
Mechanical Dimension :
C
B | F |
RECOMMENDED PAD PATTERNS
A
E
D
2.5
UNIT : mm/inch
A = 10.40 / 0.409 Max.
C = 9.00 / 0.354 Max.
F = 2.50 / 0.098
G = 2.90 / 0.114
2.5
G
H
Electrical Characteristics : At 25oC: 100KHz, 1V
PART NO. |
| L 1 1 | Li |
| DCR | Isat 2 | Irms 3 |
| B | D | E | H | |||
| (uH) | (uH) |
| (m | ) MAX | (Adc) | (Adc) |
| (mm/inch) MAX | (mm/inch) MAX | (mm/inch) | (mm/inch) | |||
|
|
|
| ||||||||||||
| 5.50 | 2.800 |
| 18.00 | 8 | 6.4 |
| 4.2 / 0.165 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | ||||
| 0.40 | 0.320 |
|
| 2.00 | 30 | 20.0 |
| 4.5 / 0.177 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | |||
| 0.22 | 0.176 |
|
| 0.90 | 48 | 31.0 |
| 5.0 / 0.197 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | |||
| 0.50 | 0.400 |
|
| 1.60 | 25 | 22.0 |
| 5.0 / 0.197 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | |||
| 1.00 | 0.800 |
|
| 2.00 | 16 | 17.0 |
| 5.0 / 0.197 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | |||
| 1.20 | 0.960 |
|
| 2.00 | 13 | 17.0 |
| 5.0 / 0.197 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | |||
| 1.20 | 0.900 |
|
| 6.00 | 21 | 12.0 |
| 5.0 / 0.197 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | |||
| 2.20 | 1.650 |
|
| 6.00 | 12 | 12.0 |
| 5.0 / 0.197 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | |||
| 4.70 | 3.760 |
| 11.50 | 8 | 8.0 |
| 5.0 / 0.197 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | ||||
| 0.20 | 1.600 |
|
| 0.65 | 48 | 35.0 |
| 5.5 / 0.217 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | |||
| 0.56 | 4.480 |
|
| 1.20 | 20 | 25.0 |
| 5.5 / 0.217 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | |||
| 0.70 | 0.560 |
|
| 1.60 | 13 | 22.0 |
| 5.5 / 0.217 | 1.8 / 0.071 | 5.7 / 0.224 | 8.5 / 0.335 | |||
| 0.80 | 0.600 |
|
| 4.00 | 21 | 13.5 |
| 5.5 / 0.217 | 1.7 / 0.669 | 5.6 / 0.220 | 8.3 / 0.327 | |||
| 1.50 | 1.080 |
|
| 4.00 | 15 | 13.5 |
| 5.5 / 0.217 | 1.7 / 0.669 | 5.6 / 0.220 | 8.3 / 0.327 | |||
| 3.00 | 2.400 |
|
| 6.50 | 12 | 11.0 |
| 7.5 / 0.295 | 1.7 / 0.669 | 5.6 / 0.220 | 8.3 / 0.327 | |||
1. Tolerance of inductance is |
|
| 20%. |
|
|
|
|
|
|
|
| ||||
2. Isat is the DC | current which | cause | the inductance | drop to | Li. |
|
|
|
3.Irms is the DC current which cause the surface temperature of the part increase less than 45OC.
4.Operating temperature :
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL:
http://www.deltaww.com
125