![Through Hole Power Inductors](/images/new-backgrounds/120131/1201311x1.webp)
Through Hole Power Inductors
THAH1485 & 1411 Type
Features
RoHS compliant.
High current ( lsat up to 40A ) though hole type.
Magnetically shielded, suitable for hight density mounting.
High energy storage and low DCR.
Ideal for power source circuits,
In addition to the standard versions shown here,
customized inductors are available to meet your exact requirements.
Mechanical Dimension:
A
B
E | RECOMMENDED PAD PATTERNS |
| 2.0(REF.) |
D
C
UNIT:mm/inch
A = 13.50 / 0.531 Max.
B = 13.50 / 0.531 Max.
D= 16.00 0.5 / 0.630
0.020
E= 3.50 0.5 / 0.138
0.020
F= 1.70 / 0.067
F
Electrical Characteristics: At 25oC: 100KHz, 1.0V
PART NO. | Lo1 | Li | DCR | I sat 2 | Dimension "C" | |
(uH) | (uH) MIN | (m ) MAX | (Adc) | (mm / inch) MAX | ||
0.40 | 0.320 | 0.9 | 40 | 8.5 | / 0.335 | |
0.50 | 0.375 | 0.9 | 40 | 8.5 | / 0.335 | |
0.70 | 0.547 | 1.1 | 40 | 10.5 | / 0.413 | |
0.80 | 0.576 | 1.1 | 40 | 10.5 | / 0.413 |
1. | Lo is the initial inductance and the tolerance is |
|
| 20%. |
|
| |||
2. | Isat is the DC current which cause the inductance | drop not lower than Li. | ||
3. | Operating temperature : |
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C. TEL:
http://www.deltaww.com
148