Delta Electronics manual Through Hole Power Inductors, THMR1395 Type, Features

Through Hole Power Inductors

THMR1395 Type

Features

High current ( lsat up to 66A ) though hole type.

Magnetically shielded, suitable for hight density mounting.

High energy storage and low DCR.

Ideal for power source circuits, DC-DC converter,

DC-AC inverters inductor application.

In addition to the standard versions shown here,

customized inductors are available to meet your exact requirements.

Mechanical Dimension:

RECOMMENDED PAD PATTERNS

A

B

D

C

E

1.6/0.063
		UNIT : mm/inch
		A = 12.50	/ 0.492 Max.
	9.0/0.354	B = 14.50	/ 0.571 Max.
		C = 3.20	0.5 / 0.126	0.020
		D = 9.50 / 0.374
7.5/0.295		E = 1.30	0.1/0.051	0.004

Electrical Characteristics: At 25oC: 100KHz, 1.0V

PART NO.	L1	DCR	Isat 2	Irms 3
	(uH)	(m ) 8%	(Adc)	(Adc)
THMR1395-R28	0.28	0.47	66	47
THMR1395-R35	0.35	0.47	58	47
THMR1395-R45	0.45	0.96	47	35
THMR1395-0R6	0.60	0.96	40	35
THMR1395-0R8	0.80	1.25	37	30
THMR1395-1R2	1.20	1.55	30	27

1.Tolerance of inductance : 0.28~1.20uH15%

2.Isat is the DC current which cause the inductance drop less than 20% of its nominal inductance without current 3.Irms is the DC current which cause the surface temperature of the part increase less than 45oC 4.Operating temperature: -40oC to 125oC ( including self-temperature rise )

DELTA ELECTRONICS, INC.

(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.

TEL: 886-3-3591968; FAX: 886-3-3591991

http://www.deltaww.com

153