Delta Electronics instruction sheet X Description of the Digital keypad VFD-PU06, Descriptions

2007-07-19

5011615002-U6E2

VFD-PU06Digital Keypad Instruction Sheet

XDescription of the Digital keypad VFD-PU06

					LED Display
Frequency Command					Indicates frequency, voltage, current, user
Status indicator	F				defined units, read, and save, etc.
Output Frequency
	H				Model Number
Status indicator	U
User Defined Units		VFD-PU06			Status Display
Status indicator
					Display the driver's current status.
JOG				EXT PU
By pressing JOG key,
Jog frequency operation.					MODE
UP and DOWN Key				PU	Change between different display mode.
Set the parameter number
and changes the numerical
data, such as Master Frequency.
Left Key					Right key
Move cursor to the left.					Move the cursor to the right
FWD/REV Key
Select FWD/REV operation.
	RUN		STOP		STOP/RESET
		RESET			Stops AC drive operation and reset the drive
					after fault occurred.
					RUN Key
					Start AC drive operation.

YExplanation of Display Message

Display Message Descriptions

The AC motor drive Master Frequency Command.

The Actual Operation Frequency present at terminals U, V, and W.

The custom unit (u)

The output current present at terminals U, V, and W.

Press to change the mode to READ. Press PROG/DATA for about 2 sec or until it’s flashing, read the parameters of AC drive to the digital keypad PU06. It can read 4 groups of parameters to PU06. (read 0 - read 3)

Press to change the mode to SAVE. Press PROG/DATA for about 2 sec or until it’s flashing, then write the parameters from the digital keypad PU06 to AC drive. If it has saved, it will show the type of AC motor drive.

The specified parameter setting.

The actual value stored in the specified parameter.