Delta Electronics instruction sheet VFD-USB01 USB/RS485 通訊介面, Instruction Sheet, 說明書

20070718

5011661301-TUS1

VFD-USB01USB/RS485 Communication Interface

Instruction Sheet

Please thoroughly read this instruction sheet before installation and putting it into use.

The content of this instruction sheet and the driver file may be revised without prior notice. Please consult our distributors or download the most updated instruction/driver version at http://www.delta.com.tw/product/em/control/cm/control_cm_main.asp

XPreface

VFD-USB01 is a convenient RS485-to-USB converter, which does not require external power-supply and complex setting process. It supports baud rate from 75 to 115.2kbps and auto switching direction of data transmission. In addition, it adopts RJ-45 in RS-485 connector for users to wire conveniently. And its tiny dimension, handy use of plug-and-play and hot-swap provide more conveniences for connecting all DELTA IABU products to your PC.

YApplicable Models: All DELTA IABU products

ZApplication	[ Specifications
	Power Supply	No external power is needed
	Power	0.4W
	Consumption
	Isolated Voltage	3000Vdc
		Support 75, 150, 300, 600,
	Baud Rate	1200, 2400, 4800, 9600,
		19200, 38400, 57600,
		115200bps
	RS485 Connector	RJ-45
	USB Connector	A type (plug)
	Compatibility	Full Compliance with USB
		V2.0 specification
	Max. Cable Length
	(between PC to	100m
	VFD-USB01)
	Support RS-485 Half-Duplex Transmission
\ RJ-45	] Dimension
PIN	Description
1	Reserved
2	Reserved
3	Reserved
4	SG+
5	SG-
6	Reserved
7	Reserved
8	Reserved

^LED Display

1.Steady Green LED ON: power is ON.

2.Blinking orange LED: data is transmitting.

_Preparations before Driver Installation

Please extract the driver file (VFD-USB01_Drivers.exe) by following steps. You could find driver file (VFD-USB01_Drivers.exe) in the CD supplied with VFD-USB01.

NOTE

Do NOT connect VFD-USB01 to PC before extracting the driver file.

Step 1 Step 2

Step 3 Step 4

Step 5

You should have a folder marked SiLabs under drive C.

`Driver Installation

After connecting VFD-USB01 to PC, please install driver by following steps.

VFD-USB01 USB/RS485 通訊介面

說明書

請詳細閱讀下列說明後才使用本產品，以確保使用安全。

由於產品精益求精，當內容規格或驅動程式有所修正時，請洽詢代理商或至台達網站

(http://www.delta.com.tw/product/em/control/cm/control_cm_main.asp )下載最新版本。

X引言

VFD-USB01RS-485/USB轉換裝置，不需外接電源，不需任何設定，即可支援不同的傳輸速率

從 75 到 115.2kbps，並可自動切換資料流方向。通過 USB 接口有隨插即用和熱插拔的方便性， 提供和 RS-485裝置的溝通介面，體積小且方便使用，RS485 採用 RJ-45網路線接口，使用者 能更便利的接線。

Y適用機種：台達電子 IABU 全系列產品

Z應用[規格

電源需求 不需外接電源

消耗功率	0.4W
隔離電壓	3000Vdc

	支援 75，150，300，
	600，1200，2400，
傳輸速度	4800，9600，
	19200，38400，
	57600，115200bps
RS-485 端子形式	RJ-45
USB 接頭	A type (plug)
相容性	符合 USB v2.0 規格
最大使用線長	100 公尺
(PC 至 VFD-USB01)

支援 RS-485 半雙工

\ RJ-45	] 尺寸
PIN	Description
1	Reserved
2	Reserved
3	Reserved
4	SG+
5	SG-
6	Reserved
7	Reserved
8	Reserved

^LED 顯示

1.綠色 LED 亮起，表示有電源。

2.橘色 LED“閃爍＂，表示資料傳輸。

_安裝驅動程式前準備工作

請將隨機所附 CD 內的 USB driver 驅動程式檔（VFD-USB01_Drivers.exe）依下列步驟解壓 縮。

NOTE 在解壓縮檔案前，請勿將 VFD-USB01插入電腦。

Step 1 Step 2