2.Attach right and left mounting bracket with two previously existing bolts on each side.
3.Install cross member with three 3/8" x 1- 1/4" hex bolts, lockwashers and hex nuts on each side.
4.Install center support brace by taking two bolts out of vehicles center brace.
(NOTE: Be sure to leave in the third bolt, only remove two bolts.) Attach center support to vehicle using two 10mm x 1.25 x 30mm bolts and 10mm lockwashers. Snug tighten these bolts and secure front of support using two 3/8" x
NOTE: Center support brace goes on top of baseplate center bracket.
