IMPORTANT SAFEGUARDS

When using this electrical appliance, safety precautions should always be observed, including the following:

READ ALL OF THE INSTRUCTIONS.

Close adult supervision must be provided when this appliance is used by or near children.

Using attachments not recommended or sold by Keystone Manufacturing Co., Inc. may cause hazards.

DO NOT allow the cord to hang over the edge of the counter or touch hot surfaces.

Place the Deni Buffet Server securely in the center of the counter or work space.

Do not place near hot gas or electric burner.

Do not touch hot surfaces.

Turn the thermostat to the OFF position before plugging in or unplugging.

To disconnect, remove plug from electrical outlet.

CAUTION: The surface will remain warm after the unit is turned off.

Always unplug the unit before attempting to move it. Extreme caution must be used when moving appliances containing hot oil or other hot liquids.

DO NOT operate with a damaged cord. Return the appliance to Keystone Manufacturing Company Inc. for proper service, replacement or repair immediately.

Always unplug before cleaning and removing parts.

®

Allow to cool before putting on or taking off parts.

Always clean each part individually.

Do not use outdoors.

Do not use the Deni Buffet Server for other than intended use.

Do not clean with metal scrubbing pads. Pieces can break off the pad and short circuit the electrical parts, creating the possibility of an electrical shock.

To protect against electrical shock, do not immerse plug, cord, or motor base in water or any other liquids.

It is recommended that you do not use an extension cord with this unit. However, if one is used, it must have a rating equal to or exceeding the rating of the appliance.

DO NOT leave this appliance unattended while in operation.

Do not fill trays more than 2/3 full.

This unit is for household use only.

This appliance is supplied with a molded 3 prong grounding-type plug and should be used in combination with a properly connected grounding-type outlet. If a grounding-type outlet is not available, an adapter may be obtained so that a 2 slot wall outlet can be used with a 3 prong plug. The adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate.

SAVE THESE INSTRUCTIONS

1

Page 2
Image 2
Deni 15130 manual Important Safeguards