State-of-the-art Denon Solutions forMaximizing Content Quality

• Robust power source for each block,

for stable supply of current

To produce a clear, stable power circuit that prevents unwanted noise from affecting the sound, the AVR-1610 has a dedicated CPU transformer that is separate from the audio and video circuitry. The AVR-1610 is endowed with a powerful rectifier circuit with 6,000 μF block capacitors and a bridge diode of 8A capacity, surpassing typical models in this price range, to supply stable current with negligible noise.

• Analog to HDMI up-conversion

Analog video input signals (composite, S-video, component) are converted to digital video signals and transmitted to the HDMI output port. Digital video signals are sent to the HDMI output even when multiple HDMI devices such as a video camera or a game console are connected to the AVR-1610. One HDMI cable is all that’s needed to connect the AVR-1610 to a TV (monitor). You can also use the On-Screen Display to check the AVR-1610’s status.

• Dolby Pro Logic IIz processing(*1)

Dolby Pro Logic IIz introduces a new dimension to home theater entertainment through the addition of a pair of front height channels. Compatible with stereo, 5.1 and 7.1 content, Dolby Pro Logic IIz provides enhanced spaciousness, depth and dimension to movies, concert video and video game playback while maintaining the full integrity of the source mix.

(*1) Dolby Pro Logic IIz playback requires a separate 2-channel power amplifier.

Main Specifications

Power amplifier section

 

Rated output

*THD figures are power amp stage values.

Front L/R

75 W + 75 W

 

(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)

 

110 W + 110 W

 

(6 ohms, 1 kHz, THD 0.7%)

Center

75 W

 

(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)

 

110 W

 

(6 ohms, 1 kHz, THD 0.7%)

Surround L/R

75 W + 75 W

 

(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)

 

110 W + 110 W

 

(6 ohms, 1 kHz, THD 0.7%)

• Minimum Signal Path for clear audio and video signal

The “simple and straight” design concept has been thoroughly implemented in the signal paths to contribute to immaculately clean audio and video playback. Signal paths are as short as possible to keep signal degradation in the audio and video circuitry to an absolute minimum.

•Direct Mechanical Ground Construction, embodying concepts for thorough vibration

resistance

Vibration-resistant construction has been reviewed to thoroughly suppress the adverse influences of vibration on sound quality. The power transformers, a source of vibration, have been securely mounted on the highly rigid bottom chas- sis. Direct mounting of cast-iron feet to the radiator in near proximity to each other serves to suppress mutual vibration with the power transformers and other sources of vibration.

•Digital /analog separate transformer windings

•Compressed Audio Restorer to enhance digital music files

Connectivity & Future-ready Expandability

• Audio/video playback and control

for iPod with optional dock (ASD-11R)

Preamplifier section

 

Input sensitivity/impedance

200 mV / 47 kΩ/kohms

Frequency response

10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)

S/N Ratio

98 dB (IHF-A weighted, DIRECT mode)

FM section

 

Tuning frequency range

87.5 - 107.9 MHz

Usable sensitivity

1.2 μV (12.8 dBf)

AM section

 

Tuning frequency range

520 - 1710 kHz

Usable sensitivity

18 μV

General

 

Power supply

AC 120 V, 60 Hz

Power consumption

4.3 A (Standby 0.3 W)

Dimensions (W x H x D)

17-3/32” x 6-47/64” x 14-27/32”

 

434 x 171 x 378 mm

Weight

20 lbs 8 oz, 9.3 kg

Ease-of-use

• Audyssey Dynamic Volume,

for real-time volume adjustment

Audyssey Dynamic Volume constantly monitors the sound sources and adjusts the volume to the optimum level for the particular source being heard without sacrificing dynamic range. The AVR-1610 is also equipped with Audyssey MultEQ which measures the acoustic characteristics of the room to obtain the optimum acoustic effects, and Dynamic EQ which reproduces the high and low range with the optimum acoustic effect during low volume levels. Dynamic Volume combines these two functions to achieve maximum performance.

•Audyssey MultEQ Auto setup and Room EQ

-Tower type microphone for more accurate measuring

-Up to six measurement points

-High level resolution filters for satellite speakers and subwoofer

•Auto surround mode

•Audio Delay function (max. 6 frames or 200 mSec)

•Muting level settings (Full/-40dB/-20dB)

•Audio level memory, capable of correcting

different signal levels for each input device

• Variable subwoofer crossover switching

Ports

In

HDMI

x 3

 

Component

x 2

 

S-Video

x 1

 

Composite (Video)

x 4

 

Analog Audio (Tuner included)

x 6

 

Digital Optical

x 2

 

Digital Coaxial

x 1

Out

HDMI Monitor

x 1

 

Component Monitor

x 1

 

Composite Monitor (Monitor / DVR)

x 2

 

Analog Audio REC

x 2

 

Audio Preout (Front hight L/R, SW)

x 2

 

Phones

x 1

Other

Microphone Port

x 1

 

Dock Control Port

x 1

 

 

FM Tuner Antenna

x 1

 

AM Tuner Antenna

x 1

 

 

 

*Design and specifications are subject to change without notice. *“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. *DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.

*HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. *Audyssey MultEQ® is a registered trademark of Audyssey Laboratories. Audyssey Dynamic EQ™ is a trademark of Audyssey Laboratories. Audyssey Dynamic Volume™ is a trademark of Audyssey Laboratories. *iPod® is a trademark of Apple Inc., registered in the U.S. and other countries.

Denon Electronics (USA), LLC.

Denon Canada Inc.

17600509 A

Denon Brand Company

100 Corporate Drive, Mahwah, New Jersey 07430 USA

505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1

D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,

TEL: 201-762-6500 usa.denon.com

TEL: 905-475-4085 ca.denon.com

Kanagawa, 210-8569, Japan

 

 

www.denon.com