ENGLISH
Playback using the external input (EXT. IN) jacks
After starting playback
1 | Set the external input (EXT. IN) mode. | |
Press the EXT. IN to switch the external input. | ||
| EXT.IN |
|
|
| EXT.IN |
| (Main unit) | (Remote control unit) |
Once this is selected, the input signals connected to the FL (front left), FR (front right), C (center), SL (surround left), SR (surround right), SBL (surround back left) and SBR (surround back right) channels of the EXT. IN jacks are output directly to the front (left and right), center, surround (left and right) and surround back (left and right) speaker systems as well as the
In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SUBWOOFER jack.
2 | Cancelling the external input mode |
| |||
To cancel the external input (EXT. IN) setting, | |||||
| press the input mode (AUTO, PCM, DTS) or | ||||
| ANALOG button to switch to the desired input | ||||
| mode. (See page 23.) |
|
| ||
| AUTO | PCM | DTS | ANALOG |
|
|
|
|
| MODE | ANALOG |
B
2 | 1 |
|
|
|
| 6.1 / 7.1 | DIRECT | STEREO |
|
| SURROUND |
| ||
2 |
| INPUT |
|
|
MODE | ANALOG | EXT.IN | 1 | |
| SYSTEM CALL |
| ||
| CALL 1 | CALL 2 | BACKLIGHT |
|
NOTES:
•In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be output from channels not connected to the input jacks.
•The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode.
[1]Adjusting the sound quality (TONE)
The tone control function will not work in the Direct mode.
1 | The tone switches as follows each time the |
|
| ||
TONE CONTROL button is pressed. |
| B |
| ||
| TONE |
|
|
|
|
| CONTROL |
|
|
|
|
| BASS | TREBLE |
|
| |
| (Main unit) |
|
|
|
|
2 |
|
|
| 3 | 2 1 |
With the name of the volume to | SELECT |
|
| ||
|
|
| |||
be adjusted selected, turn the |
|
|
| ||
| SELECT knob to adjust the level. |
|
|
| |
|
|
| (Main unit) |
|
|
| • To increase the bass or treble: Turn the control 3 | If you do not want the bass and treble to be | |||
| adjusted, turn on the tone defeat mode. | ||||
| clockwise. (The bass or treble sound can be |
|
| ||
| increased to up to +12 dB in steps of 2 dB.) | TONE DEFEAT |
| ||
| The signals | do not pass | |||
| • To decrease the bass or | treble: Turn the | |||
| through the bass and treble | ||||
| control clockwise. (The bass or treble sound | adjustment circuits, providing | |||
| can be decreased to up to | higher quality sound. | |||
| 2 dB.) |
|
| (Main unit) |
|
[2] | Listening over headphones |
|
|
|
|
1 | Connect the headphones to |
| PHONES |
|
|
the PHONES jack of the front |
|
| B |
| |
|
|
|
| ||
| panel. |
|
|
|
|
(Main unit) | (Remote control unit) |
|
|
•When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, DOLBY/DTS SURROUND, 5/7CH STEREO, WIDE SCREEN or DSP SIMULATION) cannot be set.
|
|
|
| 1 |
|
2 | Press the OUTPUT button to play the sound | 1 | |||
over the headphones only. |
|
|
| ||
|
|
|
| ||
| TV/ | 0 | +10 |
| NOTE: |
| VCR |
| |||
| OUTPUT | PTY | RT | 2 | To prevent hearing loss, do not raise the volume level |
| RDS | ||||
| TEST | SPEAKER | OUTPUT | ||
| TONE |
|
| excessively when using headphones. | |
|
| SURROUND |
|
| |
| DOLBY/DTS | DSP | 5CH / 7CH |
| |
| SURROUND | SIMU. | STEREO |
|
|
•The output to the speaker and
Caution: Switching off the power of the unit and the unit will cancel the settings.
[3] Turning the sound off temporarily (MUTING)
1 | Use this to turn off the audio | MUTING |
output temporarily. |
|
Press the MUTING button.
Cancelling MUTING (Remote control unit)
mode.
Press the MUTING button again.
TUNING
+ |
| + |
|
SKIP | ENTER |
| |
- | SHIFT | - |
|
SKIP | MUTING | 1 | |
TUNER | PHONO | CD |
1 2 3
24