Basic Operation
If you are using a broadband router (DHCP function), there is no need to make the settings at “System Setup Menu” - *“7.Option Setup” - “7.Network Setup”, since the DHCP function is set to “ON” in the
If the
Basic Operation
•Once the settings are completed, press the ENTER button three times to quit the “System Setup Menu”.
Standby Mode Power Saving
When not using the
2DHCP (Dynamic Host Configuration Protocol) and Auto IP
These are systems by which the IP address and other
network settings are automatically set for the AVC-
A11XV/A1XV, computer, broadband router and network
devices.
5.Primary DNS / Secondary DNS
Set the IP address within the ranges shown below.
If there is only one DNS address indicated in the documentation supplied by your provider, input it at “e. 1st”. If there are two or more DNS addresses, input the first one at “f. 2nd”.
mode.
Set “OFF” when using the
PC Language
Select according to the language of the computer being used. The languages are indicated with three letters conforming to
2DNS (Domain Name System)
This is a system for converting the domain names used when
browsing Internet sites (for example, “www.jp”) into the IP
addresses actually used for communications (for example,
“202.221.192.106”).
Setting the IP Address
1.DHCP Settings
Set whether or not to make the DHCP settings automatically.
ON (default settings):
The DHCP function is enabled.
OFF:
The DHCP function is disabled.
2.IP Address
Set the IP address within the ranges shown below. The Net Audio function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
3.Subnet Mask
When connecting an xDSL modem or terminal adapter directly to the
4.Gateway
Set the IP address within the ranges shown below.
When connected to a gateway (router), input its IP address.
Setting the Proxy
Make this setting when connecting to the Internet via a proxy server.
1.Proxy:
In some cases it is necessary to pass through a proxy server to connect to the Internet.
ON:
The proxy server is enabled.
OFF (default settings):
The proxy server is disabled.
2.Proxy Address/Name
Input the proxy server domain name or address. If “ON” has been set at the “Proxy” setting, the character input mode is set when this item is selected and the CURSOR G button is pressed. Use the CURSOR D, H, F and G buttons to choose the character, then press the ENTER button. Once all the characters have been input, the character input mode is canceled.
3.Port
Input the proxy server port number. If “ON” has been set at the “Proxy” setting, the number input mode is set when this item is selected and the CURSOR G button is pressed. Use the CURSOR D, H, F and G buttons to choose the number, then press the ENTER button. Once all the numbers have been input, the number input mode is canceled.
8