ENGLISH

Basic Operation

STANDARD DIRECT/STEREO

SURROUND PARAMETER SELECT

Surround

Playing audio sources (CDs and DVDs) 2-channel playback modes

•The AVR-1906 is equipped with 2-channel playback modes exclusively for music.

•Select the mode to suit your tastes.

2DIRECT mode

Use this mode to achieve good quality 2-channel sound while watching images. In this mode, the audio signals bypass such circuits as the tone circuit and are transmitted directly, resulting in good quality sound.

Press the DIRECT/STEREO button on the main unit or the DIRECT button on the remote control unit to select the DIRECT mode.

2STEREO mode

Use this mode to adjust the tone and achieve the desired sound while watching images.

Press the DIRECT/STEREO button on the main unit or the STEREO button on the remote control unit to select the STEREO mode.

STANDARD

DIRECT STEREO

SURROUND

ENTER PARAMETER

CURSOR

Dolby Pro Logic IIx (Pro Logic II) mode

•To play in the PLIIx mode, set “S. BackSp” at the “Speaker Configuration” setting to “1sp” or “2sp”.

•To play in the PLIIx mode, set “Surround Back” at the “Power Amp Assign.” setting.

1 Press the STANDARD button to select the Dolby Pro Logic IIx mode.

•The Dolby Pro Logic II indicator lights.

Lights

The mode switches as shown below each time the STANDARD button is pressed.

DOLBY PLIIx DTS NEO:6

2 Play a program source.

For operating instructions, refer to the manuals of the respective components.

3 Press the SURROUND PARAMETER button to select the surround parameter mode.

21

Basic Operation

4 Turn the SELECT knob, and press the CURSOR F or G button to select the optimum mode for the source.

When the “SB CH OUT” parameter is set to “ON”. (Set “S. BACK” at system setup to “SMALL” or “LARGE”.)

Display

(Pro Logic IIx Cinema mode)

(Pro Logic IIx Music mode)

(Pro Logic IIx Game mode)

When the “SB CH OUT” parameter is set to “OFF”. (Set “S. BACK” at system setup to “NONE”.)

Display

(Pro Logic II Cinema mode)

(Pro Logic II Music mode)

(Pro Logic II Game mode)

(Dolby Pro Logic mode)

5 Press the SURROUND PARAMETER button, and press the CURSOR D or H button to select the various parameters.

See “Surround parameters q” for a description of the various parameters.

ENGLISH