ENGLISH

Advanced Operation

Multi zone music entertainment system

•When the outputs of the ZONE2 OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources can be played in rooms other than the MAIN ZONE in which this unit and the playback devices are installed. (Refer to ZONE2 on the diagram below.)

•ZONE2 speaker out and pre-out can be used when “ZONE2” is selected at “Power Amp Assign.” in the “System Setup” menu. In this case, surround back speaker out cannot be used for MAIN ZONE.

•When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit.

•For the AUDIO outputs, use high quality pin-plug cables and wire in such a way that there is no humming or noise.

•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

•When the main unit is set to the recording output mode, ZONE2 remote control button cannot be operated.

2When using the SURR.BACK/ZONE2 amplifier as the SURROUND BACK

•7.1-channel playback using the surround back speaker is possible in the MAIN ZONE.

•To use the ZONE2 line output, turn on the ZONE2 button.

•The ZONE2 OUT terminal’s output level cannot be adjusted with the remote control unit.

[System configuration and connections example]

Using external amplifier.

MAIN ZONE 7.1-channel systems

 

 

Monitor

ZONE2

FL

Center

FR

 

 

DVD player

 

This unit

 

 

 

 

SW

 

Input

 

RC-617

 

 

 

 

 

ZONE2 AUDIO OUT

Premain amplifier

 

 

(FIXED OUT)

or Power amplifier

SL

 

 

SR

 

 

 

PROGRAMMABLE

RC-616

SBL

SBR

REMOTE CONTROL UNIT

 

 

 

SYSTEM REMOTE CONTROL

 

 

UNIT RC-978

 

35

Advanced Operation

:ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line

:MULTI SOURCE AUDIO signal cable

Refer to “Connections” ( page 16).

ENGLISH