ENGLISH
Advanced Setup – Part 1
Setting the Function Rename
The names of the input sources displayed on the front display and the
1 Press the CURSOR D or H button to select “Function Rename” at the “Input Setup” menu, then press the ENTER button.
• The “Function Rename” screen appears.
2 Press the CURSOR D or H button to select the input source whose name you want to change, then press the CURSOR F or G button.
• The screen switches to the character input screen.
Example:
When “CD” is selected and the CURSOR F or G button is pressed
3 Press the CURSOR F or G button to move the cursor ( 2 ) to the character, number, symbol or punctuation mark you wish to input, and press the CURSOR D or H button to select that character.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
’ ( ) + ,
Up to 5 characters can be input.
4 Repeat step 3 to complete input of the input source name.
If you wish to return the input source to its initial setting, press the CURSOR H button while the input source is highlighted.
If “Yes” is selected for “Default”, the setting is automatically reset to the default name.
5 Once all the characters have been input, press the ENTER button.
• The “Function Rename” screen appears.
Use the same procedure to change other input source names as well.
6 Press the ENTER button to enter the setting.
• The “Input Setup” menu appears.
• When the input source is selected, the display is as shown below.
Example:
When the name has been changed to “DENON”
Advanced Setup – Part 1
41
ENGLISH