Advanced Setup – Part 1

Option Setup

Setting the Muting Level

This sets the amount of attenuation applied for audio output muting.

1 Press the CURSOR D or H button to select “Option Setup” at the “System Setup” menu, then press the ENTER button.

• The “Option Setup” screen appears.

2 Press the CURSOR D or H button to select “Muting Level” at the “Option Setup” menu, then press the ENTER button.

• The “Muting Level” screen appears.

3 Press the CURSOR F or G button to select the desired setting.

–20 dB:

Attenuation of the volume by –20 dB from the present level.

–40 dB:

Attenuation of the volume by –40 dB from the present level.

–– – dB:

The volume level is completely muted.

4 Press the ENTER button to enter the setting.

• The “Option Setup” menu appears.

Setting the On-Screen Display (OSD)

•Use this to turn the on-screen display (messages other than the menu screens) “ON” or “OFF”.

•Sets the on-screen display mode.

1 Press the CURSOR D or H button to select “On

Screen Display” at the “Option Setup” menu, then press the ENTER button.

• The “On Screen Display” screen appears.

2 Press the CURSOR F or G button to select “ON” or “OFF”.

3 Press the CURSOR D or H button to select the on-screen display mode, then press the CURSOR

For G button to select “MODE1” or “MODE2”.

MODE1:

Prevents flickering of the on-screen display when there is no video signal.

MODE2:

Flickering is not prevented.

Use this mode if the on-screen display does not appear in MODE1, which may happen depending on the TV being used.

4 Press the ENTER button to enter the setting.

• The “Option Setup” menu appears.

44

ENGLISH

Advanced Setup – Part 1

Setting the Power Amp Assign.

Make this setting to switch the power amplifier for the surround back channel to ZONE2 or Bi-Amp.

Power Amp

SPEAKER OUT

PRE-OUT

Assign.

 

 

S.BACK/ZONE

MAIN ZONE

ZONE2

 

 

 

 

Surround back

7.1ch system

–

Surround back

 

 

 

 

ZONE2

5.1ch system

2ch system

ZONE2

 

 

 

 

Bi-Amp

5.1ch system

–

–

 

 

 

 

1 Press the CURSOR D or H button to select “Power Amp Assign.” at the “Option Setup” menu, then press the ENTER button.

• The “Power Amp Assign.” screen appears.

2 Press the CURSOR F or G button to select the

Amp Assign mode according to the speaker system you want to set up.

3 Press the ENTER button to enter the setting.

• The “Option Setup” menu appears.

ENGLISH