ENGLISH

Getting

Connecting Equipment with HDMI connectors

With HDMI connections, the video and audio signals can be transferred with a single cable.

Started

DVD player

Monitor

b The AVR-1908 is equipped for HDMI version 1.3a. This

 

 

 

 

version is compatible with other versions, allowing

Connections

)%.*

)%.*

connection to all components equipped with an HDMI

 

 

 

065

*/

connector.

 

 

 

 

 

 

 

 

 

 

b The AVR-1908 is compatible with 30- and 36-bit Deep

 

 

 

Color.

 

 

Setup

 

 

Compatible

Details

Discs

 

 

audio format

(examples)

 

 

 

Playback

 

 

2-channel linear

2ch 32-192 kHz

CD, DVD-Video,

 

 

PCM

16/20/24 bits

DVD-Audio

 

 

 

 

 

 

Multi-channel

8ch 32-192 kHz

DVD-Audio

 

 

 

linear PCM

16/20/24 bits

Remote

 

 

 

 

 

Dolby Digital, DTS

Bitstream

DVD-Video

 

 

 

Control

 

 

Copyright protection system (HDCP)

 

 

 

 

 

 

In order to play the digital video and audio signals of a DVD-

Multi

 

 

Video or DVD-Audio disc using HDMI/DVI connections, both

 

 

the connected DVD player and monitor must be equipped

-

 

 

for a copyright protection system called “HDCP” (High-

Zone

 

 

 

 

bandwidth Digital Content Protection).

 

Information

 

 

HDCP is a copy protection technology consisting of data

 

 

encoding and mutual identification of the devices.

 

 

 

 

 

 

The AVR-1908 is HDCP-compatible. For details on the

 

 

 

DVD player or monitor you are using, refer to its operating

Troubleshooting

 

 

instructions.

 

 

• To output the sound from the TV, make the settings at menu “Manual Setup” – “HDMI Setup” – “TV”

 

• By default, the HDMI audio signals are output from the speakers connected to the AVR-1908.

 

(vpage 25).

 

 

 

 

NOTE

Use a CPPM-compatible DVD player to play DVD-Audio discs that are copyright-protected by CPPM.

The AVR-1908 cannot be controlled from another device via the HDMI cable.

The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted by the connected device.

Video signals are not output properly when using devices that are not HDCP-compatible.

Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, switch the DVD player’s resolution to a resolution with which the monitor is compatible.

If the menu “Manual Setup” – “HDMI Setup” setting (vpage 25) is set to “AMP”, the sound may be interrupted when the monitor’s power is turned off.

Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI connector. Normal playback may not be possible when using a cable other than one on which the HDMI logo is indicated (a non-HDMI-certified product).

If the monitor or DVD player does not support deep color, deep color signal transfer is not possible.

If the monitor or DVD player does not support xvYCC, xvYCC signal transfer is not possible.

When the AVR-1908 and DVD player are connected using an HDMI cable, also connect the AVR-1908 and monitor using an HDMI cable.

If the connected monitor or DVD player only has a DVI-D connector, use an HDMI/DVI converter cable. When using a DVI cable, no audio signals are transmitted.

Use a Deep Color compatible cable for connection to Deep Color compatible devices.

When connecting with an HDMI/DVI converter cable (adapter)

HDMI video signals are theoretically compatible with the DVI format.

When connecting to a monitor, etc., equipped with a DVI-D connector, connection is possible using an HDMI/DVI converter cable, but depending on the combination of components in some cases the video signals will not be output.

When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly due to poor connections with the connected cable, etc.

11