
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
g
Manual EQ
Adjust tonal quality for each speaker using graphic equalizer.
Base Curve Copy
Copy the Room EQ´s “Audyssey Flat” correction curve.
[Selectable items]
Yes No
“Base Curve Copy” is displayed after the auto setup procedure has
been performed.
Adjust CH
Select speaker adjustment method.
[Selectable items]
Each CH : Adjust tonal quality for each speaker separately.
L/R CH : Adjust tonal quality for each L/R speaker pair.
ALL CH : Adjust tonal quality for all speakers together.
Default
Resets the settings to the default values.
Manual EQ
Select the speaker and frequency band and adjust the level.
[Selectable items] 63Hz 125Hz 250Hz 500Hz 1kHz
2kHz 4kHz 8kHz 16kHz
[Variable range] –20dB ~ +6dB
Zone2 Setup
Make settings for audio playback in a ZONE2 system.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone2 Setup
5.Option Setup
3.Audio Setup
a
Lch Level
Adjust the left channel output level.
2-4.Zone2 Setup
Level Lch : 0
dB
Rch : 0
dB
Vol.Limit : OFF
Power On Lev.: Last
Mute Lev. : Full
[Selectable items]
Last : Use the memorized setting from the last session.
– – – : Always use the muting on condition when power
is turned on.
–70dB ~ +18dB : Set the volume level when the power is turned on
in units of 1 dB.
[Selectable items]
Full : The sound is cut off entirely.
–40dB : The sound is attenuated by 40 dB.
–20dB : The sound is attenuated by 20 dB.
[Variable range] –12dB ~ 0dB ~ +12dB
[Variable range] –12dB ~ 0dB ~ +12dB
s
Rch Level
Adjust the right channel output level.
[Selectable items]
OFF : Do not set a maximum volume.
–20dB : Set the maximum volume to –20 dB.
–10dB : Set the maximum volume to –10 dB.
0dB : Set the maximum volume to 0 dB.
d
Volume Limit
Make a setting for maximum volume.
f
Power On Level
Define the volume setting that is active when the power is turned
on.
g
Mute Level
Set the amount of attenuation when muting is on.
Setup