

Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH

Audio Setup

Make settings for audio playback.
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone2 Setup
5.Option Setup
3.Audio Setup
2.2ch Direct/Stereo
3.Dolby Digital Setup
4.Auto Surround Mode
5.Manual EQ
1.EXT.IN SW Level
2-3.Audio Setup

s

2ch Direct/Stereo

Make speaker settings for 2-channel mode playback.

Setting

To change the settings, select “Custom”.
[Selectable items]
Basic
z
: To change the settings, select “Custom”.
Custom : Make separate settings for 2-channel mode.
z: Use the same settings as in “Speaker Setup”.

a

EXT. IN Subwoofer Level

Set the subwoofer level for playback.
Select according to the player in use.
[Selectable items]
0dB +5dB +10dB :
Select according to the player in use.
+15dB :
This is the recommended level.

Subwoofer Mode

Select low range signal to be reproduced by subwoofer.
[Selectable items]
LFE LFE+Main : Select subwoofer signal.

Crossover

Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz
200Hz 250Hz : Select crossover frequency.

Distance FL

Set distance from listening position to front left speaker.
[Variable range] 0.00m ~ 18.00m

Distance FR

Set distance from listening position to front right speaker.
[Variable range] 0.00m ~ 18.00m

d

Dolby Digital Setup

Set dynamic range for downmix playback of Dolby Digital
sources.
Set this to ON” if the sound from the front speakers seems
distorted.
When not using the center speaker or surround speakers, the
playback sound is down-mixed and output from the front speakers.
[Selectable items]
ON : Compression is used. Select this if sound from front
speakers is distorted.
OFF : Do not use compression. This is the recommended setting.

f

Auto Surround Mode

Make setting for memorizing surround mode setting for each input
signal type.
The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM,
etc.)
When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.
[Selectable items]
ON : Memorize settings. Most recently stored surround mode is
automatically selected.
OFF : Do not memorize settings. Surround mode does not change
according to input signal.

Front

Select front speaker size.
[Selectable items]
Large Small : Select front speaker size.
Subwoofer
Select subwoofer use.
[Selectable items]
Yes No : Select subwoofer use.
Setup