ENGLISH
Advanced Operation
Multi zone music entertainment system
•When the outputs of the ZONE2 output terminals are wired and connected to power amplifiers installed in other rooms, different sources can be played in rooms other than the MAIN ZONE in which this unit and the playback devices are installed. (Refer to ZONE2 on the diagram below.)
•Settings can be made at “Power Amp Assign” in the “System Setup Menu” so that the same source as the ZONE2 output terminals can be played from the speakers connected to the ZONE2
speaker terminals ( page 21).
To control playback devices other than the ones above, either use that device’s remote control unit or preset a separately sold programmable remote control unit.
•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.
Advanced Operation
2When using the SURROUND BACK amplifier as the ZONE2 output
When the surround back’s power amplifier is assigned to the ZONE2 output channel at “Power Amp Assign” in the “System Setup Menu”, the surround back speaker terminals can be used as
the ZONE2 speaker out terminals ( page 54).
[System configuration and connections example]
• Using this
MAIN ZONE | ZONE2 | |
| Monitor | Monitor |
| FL | FR |
FL | FR |
|
DVD player
C
SW
2When using the power amplifier as the MAIN ZONE output
The
[System configuration and connections example]
Input
ZONE2 Video out
• Using this
MAIN ZONE | ZONE2 | |
Monitor |
| Monitor |
| ZONE2 |
|
| Video out |
|
FL | FR |
|
C | FL | Premain Amplifier FR |
| ||
SW |
| |
|
| |
DVD player |
|
|
Input | ZONE2 Audio out |
|
(Fixed out) |
| |
|
| |
SL | SR |
|
SB | SB |
|
L | R |
|
: Multi source video signal cable
:Multi source audio signal cable
:Speaker cable
Refer to “Connections” ( page 21).
SL | SR |
40
ENGLISH