Advanced Operation

<FUNCTION>

<ZONE2/REC SELECT>

[ZONE2 OFF]

[ZONE1 (MAIN) ON/OFF]

[ZONE2 ON]

 

[ZONE2]

 

[FUNCTION]

 

(ZONE2)

[CHANNEL]

 

 

[VOLUME]

About the button names in this explanation

<> : Buttons on the main unit

[

] : Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

Outputting a program source to amplifier, etc., in the ZONE2 room

(ZONE2 SELECT mode)

1 Press <ZONE2/REC SELECT> to display the “ZONE2 SOURCE” on the display.

•The “ ” indicator lights.

ZONE2 RECOUT

2 With “ZONE2 SOURCE” displayed, turn <FUNCTION> to select the source you want to output appears on the display.

3 Start playing the source to be output.

For operating instructions, refer to the manuals of the respective components.

•The signals of the source selected in the ZONE2 mode are also output from the VCR-1, VCR-2 and CDR/TAPE recording output terminals.

•Digital signals are not output from the ZONE2 audio output terminals.

•About the MULTI ZONE connections ( page 40).

41

ENGLISH

Advanced Operation

Remote control unit operations during multi- source playback

1 Press [ZONE2] to select “ZONE2”.

2 Press [ZONE2 ON] to turn on the zone power.

Press [ZONE2 OFF] to turn off the zone power.

3 Select the input source you wish to output.

When the function is set to TUNER, the preset channel can be selected using [CHANNEL].

4 The volume of the outputs of the different zones can be adjusted with [VOLUME].

The ZONE2 volume can be adjusted only when “ZONE2” is selected at “Power Amp Assign” in the “System Setup

Menu” (

page 54).

Default volume setting: ZONE2 : –40 dB

The zone volume can be adjusted within the range of –70 to

18dB.

•When using ZONE2, it is possible to turn the power for the MAIN ZONE (main zone) only on or off by pressing [ZONE1 (MAIN) ON/OFF].

ENGLISH