Denon AVR-2807 69

Operating the remote control unit

Setting the punch through function

CD, CDR/MD, TAPE, DVD/VDP or VCR mode buttons can be assigned to unused TV and DBS/CABLE mode buttons.

For example, when CD mode operations are assigned to TV mode buttons, the CD mode can be operated while in the TV mode ( [ ] ).

1 Press [ON/SOURCE] and [POWER OFF] at the

same time.

• The “LEARNED/TX” indicator blinks.

2 Press [1].

• [MODE SELECTOR] (TV and DBS/CABLE) and the “LEARNED/ TX” indicator blinks.

3 Press [MODE SELECTOR] for which punch through is to be set (TV or DBS/CABLE).

•[MODE SELECTOR] (CD, CDR/MD, TAPE, DVD/VDP or VCR) and the “LEARNED/TX” indicator blinks.

4 Press [MODE SELECTOR] for the device to be punched through (CD, CDR/MD, TAPE, DVD/ VDP or VCR).

• [MODE SELECTOR] that was set will lights.

ENGLISH

Operating the remote control unit

Resetting the remote control unit

Resetting the learning function

1 Press [USE/LEARN] with the tip of a pen etc., to set the learn mode.

• [MODE SELECTOR] and the “LEARNED/TX” indicator blinks.

2 Pressreset. [MODE SELECTOR] for the device to be

• [MODE SELECTOR] and the “LEARNED/TX” indicator blinks.

3 Hold for 4 seconds or longer [MODE SELECTOR] of the equipment that is to be reset and

[ON/SOURCE].

•[MODE SELECTOR] and the“LEARNED/TX” indicator blinks again.

4 Press [USE/LEARN].

Resetting the punch through setting

1 Press [ON/SOURCE] and [POWER OFF] at the

same time.

• The “LEARNED/TX” indicator blinks.

2 Press [1].

• [MODE SELECTOR] (TV or DBS/CABLE) and the “LEARNED/ TX” indicator blinks.

3 Press [MODE SELECTOR] (TV or DBS/CABLE) that is to be reset.

•[MODE SELECTOR] (CD, CDR/MD, TAPE, DVD/VDP or VCR) and the “LEARNED/TX” indicator blinks.

4 Press [MODE SELECTOR] of the equipment that is to be reset again.

ENGLISH