State-of-the-art Denon Solutions for
Maximizing Content Quality
• Robust power source for each block, for stable supply of current
To produce a clear, stable power circuit that prevents unwanted noise from affecting the sound, the
• Minimum Signal Path
The "simple and straight" design concept has been thoroughly implemented in the signal paths to contribute to immaculately clean audio and video playback.
Signal paths are as short as possible to keep signal degradation in the audio and video circuitry to an absolute minimum.
• Direct Mechanical Ground
• Compressed Audio Restorer
Denon’s new audio technology for MP3/WMA/AAC compressed audio formats restores higher frequency sounds, along with rich, deeper bass.
Main Specifications:
Power amplifier section |
|
Rated output | *THD figures are power amp stage values. |
Front L/R | 115 W + 115 W |
| (8 ohms, 20Hz - 20kHz, THD 0.08 %) |
| 145 W + 145 W |
| (6 ohms, 1 kHz, THD 0.7%) |
Center | 115 W |
| (8 ohms, 20Hz - 20kHz, THD 0.08 %) |
| 145 W |
| (6 ohms, 1 kHz, THD 0.7%) |
Surround L/R | 115 W + 115 W |
| (8 ohms, 20Hz - 20kHz, THD 0.08 %) |
| 145 W + 145 W |
| (6 ohms, 1 kHz, THD 0.7%) |
Surround Back L/R | 115 W + 115 W |
| (8 ohms, 20Hz - 20kHz, THD 0.08 %) |
| 145 W + 145 W |
| (6 ohms, 1 kHz, THD 0.7%) |
Connectivity &
•Includes dedicated zone remote control unit
•Power amplifier assign for zone 2 or 3
•Remote in/out
•2way remote ready
(optional: DENON RC-7000CI/RC-7001RCI)
• Audyssey Dynamic Volume, for real-time volume adjustment
Large changes in volume sometimes occur between documentaries where the sound is mainly narrative and movies which often contain loud sound effects. Viewers often raise the volume for documentaries to hear the narrative more easily but then turn it down again when a commercial with loud sound effects comes on. They do this numerous times during a program of this type. Audyssey Dynamic Volume constantly monitors the sound sources and adjusts the volume to the optimum level for the particular source being heard without sacrificing dynamic range.
The
• Audyssey MultEQ XT Auto setup and Room EQ
Preamplifier section |
|
Input sensitivity/impedance | 200 mV / 47 kΩ/kohms |
Frequency response | 10 Hz ~ 100 kHz — +1, |
S/N Ratio | 100 dB |
FM section |
|
Tuning frequency range | 87.5 - 107.9 MHz |
Usable sensitivity | 1.0 μV (11.2 dBf) |
AM section |
|
Tuning frequency range | 520 - 1710 kHz |
Usable sensitivity | 18 μV |
General |
|
Power supply | AC 120 V, 60 Hz |
Power consumption | 6.0A (Standby 0.1W) |
Dimensions (W x H x D) | 434 x 171 x 414 mm |
| |
Weight | 12.8 kg |
| 28 lbs 3.5 oz |
• 2-line fluorescent display on front panel
Current status, such as the input source or audio format, is displayed in two lines. It is also possible to check the name of the album or music track of the memory audio or other items without viewing the TV screen.
The
•EL programmable remote control unit
•Three Quick Select Buttons
•Auto setup, auto surround, auto signal detection
•Auto Surround Back Channels on for
auto-detection of supporting sources
•Auto Surround mode
•Audio Delay function (max. 6 frames or 200 msec)
•Night Mode for neighbor friendly listening
•Muting level settings (Full/-40dB/-20dB)
•Audio Level Memory, capable of correcting
different signal levels for each input device
•Volume Level Limiter, for setting maximum volume levels
•Power-ON Volume Level Memory
•Variable subwoofer crossover switching
Input / Output Terminals:
IN | HDMI | 4 |
| Component | 3 |
| 7 | |
| Composite | 7 |
| Analog Audio (Tuner included) | 10 |
| Analog EXT. Input | 7.1ch |
| Digital OPTICAL | 3 |
| Digital COAXIAL | 3 |
OUT | HDMI Monitor | 1 |
| Component Monitor | 1 |
| 1 | |
| REC | 2 |
| Composite Monitor | 1 |
| REC | 2 |
| Analog Audio REC | 2 |
| Zone 2 / Zone 3 | 2 |
| Audio PRE out (7.1ch) | 1 |
| Digital OPTICAL | 1 |
Others | Dock Control Port | 1 |
| Sirius Connector | 1 |
| XM Connector | 1 |
| FM Tuner Antenna | 1 |
| AM Tuner Antenna | 1 |
| Remote In/Out | 1 |
| RS232C | 1 |
| Trigger Output (+12V, 150mA) | 2 |
*Design and specifications are subject to change without notice.
*“Dolby”, “Pro Logic” and the
*DTS is a registered trademark and the DTS logos, Symbol,
*“Neural” and “Neural Audio” and “Neural Surround” are trademarks of Neural Audio Corporation.
*Audyssey MultEQ® is a registered trademark of Audyssey Laboratories. Audyssey Dynamic EQ™ is a trademark of Audyssey Laboratories. Audyssey Dynamic Volume™ is a trademark of Audyssey Laboratories.
*“HDMI”, “HDMI logo” and
*iPod® is a trademark of Apple Inc., registered in the U.S. and other countries.
*”DCDi™” is a trademark of Faroudja, a division of Genesis Microchip Inc.
*The XM name and related logo are registered trademarks of XM Satellite Radio reserved.
*XM Ready® is a registered trademark of XM Satellite Radio Inc.
Denon Electronics (USA), LLC. | Denon Canada Inc. | Denon Brand Company | 1734 0608 A |
100 Corporate Drive, Mahwah, New Jersey 07430 USA | 505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1 | D&M Building, |
TEL: | TEL: | Kanagawa, |
|
| www.denon.com |