26

Check of the measurement results

1Select the items.
The measurement results of each item can be
checked here.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
Sp Config.Check
*Auto Setup
2Press the ENTER button and display
the verification screen.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
[Speaker Config. Check] [Delay Time Check] [Channel Level Check]
3If the check ends, press the ENTER button again.
CH SEL
ENTER
CH SEL
ENTER
(Main unit)
(Remote control unit)
Select from the following three items based on the
measurement results.
•Set with the checked measurement value.
•Perform the measurement again.
•Cancel the checked measurement value.
Store
*Auto Setup
4
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
When the “Store” is selected, all parameters are
stored up .
When the “Retry” is selected, it measures again.
5
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
NOTE:
•When measurements have been made using the
measurement microphone, speakers with a built-
in filter such as subwoofers might be set with a
value that differs from the physical distance
because of the internal electrical delay.