ENGLISH

Advanced Operation

Multi zone music entertainment system

ZONE2 speaker out can be used when “ZONE2” is selected at “Power Amp Assignment”. In this case, surround back speaker out cannot be used for MAIN ZONE.

•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

2When using the SURR.BACK/ZONE2 amplifier as the ZONE2

•To use the ZONE2, turn on the ZONE2 button.

•The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit’s ZONE2 VOLUME button.

•The input source selected with the INPUT SELECTOR knob is output for the ZONE2 speaker output.

[System configuration and connections example]

Using this unit’s internal amplifier as the ZONE2.

MAIN ZONE 5.1-channel systems

Monitor

ZONE2

FL

FR

 

C

DVD player

This unit

SW

Input

ZONE2 SPEAKER OUT

SL

SR

SYSTEM REMOTE

CONTROL UNIT RC-1001

: SPEAKER cable

Refer to “Connections” ( page 11).

Advanced Operation

ZONE2 OFF ZONE2 ON

CHANNEL

MODE 1 MODE 2

VOLUME

Remote control unit operations during multi-source playback (selecting the source)

This is only possible when the main unit in the ZONE2 mode

( page 16).

1 Set the MODE 1 switch to the “AUDIO”.

2 Set the MODE 2 switch to the “ZONE2”.

3 Press the ZONE2 ON button.

To cancel the ZONE2 mode:

Press the ZONE2 OFF button.

4 The output level of the ZONE2 SPEAKER OUT terminals can be controlled pressing the VOLUME button on the remote control unit.

Default setting (ZONE2 VOLUME LEVEL):

–– – dB (MINIMUM)

35

ENGLISH