Denon AVR-588 Page, TEST, Page, Cause, GAudioH, Symptom, GVideoH, Symptom, Countermeasure

ENGLISH

Getting

GAudioH

Symptom

Cause

Countermeasure

Page

Started

No sound is

• You

are

playing

a

monaural

• The mode is set to something

26

produced from

source (TV, AM radio broadcast,

other than “STANDARD” (Dolby/

center speaker.

etc.) in the “STANDARD” (Dolby/

DTS Surround).

Connections

DTS Surround) mode.

speakers.

• The

surround mode is set to

• Set

to

a

surround

playback

26

No sound

is produced

“STEREO” or “DIRECT”.

mode.

from surround

Setup

No sound is

• The

surround

back

speaker’s

• Check the setting and change it

24

produced from

power amplifier is assigned to a

as necessary.

surround back

different channel.

Playback

speaker.

• Surround back speaker setting is

• Set

to

something other than

20

set to “None”.

“None”.

• Surround mode not set to a mode

• Select

a

surround

playback

25, 26

Remote

for 6.1- or 7.1-channel playback.

mode.

No sound is

• Subwoofer’s power

not turned

• Turn on the subwoofer’s power.

–

produced from

on.

Control

subwoofer.

• The

“Subwoofer”

setting

at

• Set to “Yes”.

20

• The

subwoofer

is

not

properly

• Check the connections.

9

“Speaker Setup” is set to “No”.

-Multi

connected.

• The

subwoofer’s

volume

is

• Adjust the subwoofer’s volume

37

turned off.

to an appropriate level.

Zone

No test tones are

• Surround

mode

not

set

to

• Set to the “STANDARD” (Dolby/

26

Information

produced when

“STANDARD”

(Dolby/DTS

DTS Surround) mode.

remote control

Surround).

• Set the DVD player. For details,

–

DTS sound is not

• DVD player’s audio output setting

unit’s TEST button

is pressed.

output.

is not set to bitstream.

refer

to the DVD

player’s

Troubleshooting

setting is

set

to

other than

mode.

operating instructions.

• DVD

player is

not

compatible

• Use a DTS-compatible player.

–

with DTS sound playback.

• The

AVR-588’s “Input Mode”

• Set

to

the

“Auto” or “DTS”

31

“DTS”.

HDMI audio

• The

audio signal input to the

10

signals are not

HDMI input connector cannot be

output from

–

played on the AVR-588. Input the

speakers.

audio signal to the digital audio

input connector or analog audio

input connector.

No sound is

• HDMI input setting is improper.

• Check the HDMI input setting.

22

output from

the monitor

connected

with HDMI

connections.

GVideoH

Symptom	Cause	Countermeasure		Page
No picture	• The connections between the	• Check the connections.		10 ~ 17
appears.	AVR-588 and monitor are faulty.
	• The monitor’s input setting is	• Set properly.		–
	wrong.
	• The player is connected using the	• High definition (1080i/720p) and		–
	component input connectors, the	progressive (480p/576p)	video
	monitor is connected using the	signals are not down-converted.
	video (yellow) or S-Video output	Set the player to interlace
	connectors.	(480i/576i) signals.
No picture	• The connections to the HDMI	• Check the connections.		10
appears	connectors are faulty.
with HDMI	• HDMI input setting is improper.	• Check the HDMI input setting.		22
connections.	• The HDMI format of the player	• Match the HDMI format of the		10
	and monitor do not match.	player and monitor.
DVDs cannot be		• This is not a malfunction. Most		–
copied on a VCR.	–	movie software includes	copy
		prevention signals and cannot be
		copied.

53