Basic Operation

2Selecting the analog mode

ENGLISH

Basic Operation

2Input mode display

2Input signal display

• In the AUTO mode

• DOLBY DIGITAL

Press the ANALOG button to switch to the analog input.

ANALOG (exclusive analog audio signal playback mode):

The signals input to the analog input terminals are decoded and played.

NOTE:

• Input mode when playing DTS sources:

Noise will be output if DTS-compatible CDs or LDs are

played in the “ANALOG” or “PCM” mode.

When playing DTS-compatible sources, be sure to connect

the source component to the digital input terminals

(OPTICAL/COAXIAL) and set the input mode to “DTS”.

• In the DIGITAL PCM mode

• In the DIGITAL DTS mode

Depending on the input signal.

• DTS

• PCM

NOTE:

The “DIGITAL” indicator lights when digital signals are being input properly. If the “DIGITAL” indicator does not light, check whether the

Digital In Assign. setup ( page

39)and connections are correct and whether the component’s power is turned on.

• In the ANALOG mode

•The “DIGITAL” indicator will light when playing CD-ROMs containing data other than audio signals, but no sound will be heard.

20

ENGLISH