ENGLISH

Advanced Operation

Advanced Operation

Multi zone music entertainment system

•ZONE2 speaker out and pre-out can be used when “ZONE2” is selected at “Power Amp Assign.” in the “System Setup” menu. In this case, surround back speaker out cannot be used for MAIN ZONE.

•When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit.

•For the AUDIO outputs, use high quality pin-plug cables and wire in such a way that there is no humming or noise.

•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

•When the main unit is set to the recording output mode, ZONE2 remote control button cannot be operated.

2When using the SURR.BACK/ZONE2 amplifier as the ZONE2

•The SPEAKER OUT and PRE OUT terminals can be used simultaneously in ZONE2.

•To use the ZONE2, turn on the ZONE2 button.

•The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit’s ZONE2 VOLUME button.

[System configuration and connections example]

Using this unit’s internal amplifier as the ZONE2.

MAIN ZONE 5.1-channel systems

Monitor

ZONE2

FL

FR

 

C

DVD player

This unit

SW

Input

RC-617

 

ZONE2 SPEAKER OUT

SL

RC-616

SR

 

 

PROGRAMMABLE

 

SYSTEM REMOTE

REMOTE CONTROL UNIT

 

CONTROL UNIT RC-978

35

:ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line

:SPEAKER cable

Refer to “Connections” ( page 16).

ENGLISH