Advanced Operation

ZONE2 OFF ZONE2 ON

FUNCTION ZONE2/REC SELECT

FUNCTION

CHANNEL

MODE 1 MODE 2 ZONE2

VOLUME

ENGLISH

Advanced Operation

6 When the ZONE2 SOURCE function is set to TUNER, the preset channel can be selected using the CHANNEL button on the remote control unit.

This is only possible when the main unit in the ZONE2 mode

( page 43).

Outputting a program source to amplifier, etc., in a different room (ZONE2 mode)

1 Press the ZONE2/REC SELECT button to display the “ZONE2 SOURCE” on the display.

The display switches as follows each time the button is pressed.

ZONE2 REC

2 Turn the FUNCTION knob to select the source you want to output appears on the display.

3 Start playing the source to be output.

For operating instructions, refer to the manuals of the respective components.

To cancel, turn the FUNCTION knob and select “SOURCE”.

4 Press the ZONE2 button.

Lights

•The signals of the source selected in the ZONE2 mode are also output from the VCR and CDR/TAPE recording output terminals.

•Digital signals are not output to the ZONE2 output terminals.

Remote control unit operations during multi-source playback (selecting the source)

1 Set the MODE 1 switch to the “AUDIO”.

2 Set the MODE 2 switch to the “ZONE2”.

3 Press the ZONE2 ON button.

To cancel the ZONE2 mode:

Press the ZONE2 OFF button.

4 Press the FUNCTION button.

The ZONE2 source switches directly.

5 The output level of the ZONE2 SPEAKER OUT terminals can be controlled pressing the VOLUME button on the remote control unit.

Default setting (ZONE2 VOLUME LEVEL):

–– – dB (MINIMUM)

36

ENGLISH