ENGLISH
Basic Operation
SURROUND MODE
SURROUND PARAMETER SELECT
DSP surround simulation
2To operate the surround mode and the surround parameters from the remote control unit
1 Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following order each time the DSP SIMULATION button is pressed:
MONO MOVIE 
ROCK ARENA
MATRIX 
VIDEO GAME 
JAZZ CLUB 
2 Press the SURROUND PARAMETER button to enter the surround parameter setting mode.
SURROUND 
MODE
ENTER
SURROUND
CURSOR 
PARAMETER
3 Press the SURROUND PARAMETER button, and press the CURSOR D or H button to select the various parameters.
4 Press the CURSOR F or G button to adjust the parameter settings.
5 Press the ENTER button to finish the surround parameter mode.
•When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed.
Basic Operation
2Operating the surround mode and the surround parameters from the main unit‘s panel
1 Turn the SELECT knob to select the surround mode.
When turned clockwise:
DIRECT 
STEREO 
DOLBY PRO LOGIC IIx
MONO MOVIE 
5CH/7CH STEREO 
DTS NEO:6 
ROCK ARENA 
JAZZ CLUB 
VIDEO GAME
VIRTUAL SURROUND 
MATRIX 
When turned counterclockwise:
DIRECT 
STEREO 
DOLBY PRO LOGIC IIx 
MONO MOVIE 
5CH/7CH STEREO 
DTS NEO:6
ROCK ARENA 
JAZZ CLUB 
VIDEO GAME 
VIRTUAL SURROUND 
MATRIX
To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the SURROUND MODE button, then operate the selector.
2 Press and hold in the SURROUND PARAMETER button to select the parameter you want to set.
The parameters which can be set differ for the different surround modes are displayed. (Refer to “Surround modes
and parameters” ( 
page 60).)
3 Display the parameter you want to adjust, then turn the SELECT knob to set it.
The surround parameter switches in the following order each time the SURROUND PARAMETER button is pressed for the different surround modes.
•When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed.
27
ENGLISH