Basic Operation

Room EQ setting

2Operate the Room EQ from the remote control unit

1 Press the SURROUND PARAMETER button.

• The surround parameter screen appears.

2 Press the CURSOR Dor Hbutton to select “Room

EQ”.

3 Press the CURSOR F or G button to select the equalizer setting.

OFF Normal

Manual Flat Front

4 Press the ENTER button to finish surround parameter mode.

•The equalizer setting of Normal, Flat, and Front can be selected after performing the Auto Setup.

•When headphone is connected, the Room EQ cannot be used.

2Operate the Room EQ from the main unit

1 Press the SURROUND PARAMETER button.

• The surround parameter screen is appears.

2 Press the SURROUND PARAMETER button to select “Room EQ”.

3 Turn the SELECT knob to select the equalizer setting.

•When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed.

28

ENGLISH

Basic Operation

2Surround parameters r

ROOM SIZE:

This sets the size of the sound field.

There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound field, “large” a large sound field.

EFFECT LEVEL:

This sets the strength of the surround effect.

The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted.

DELAY TIME:

The delay time can be set within the range of 0 to 110 ms only in the matrix mode.

TONE CONTROL:

This can be set individually for each surround mode except PURE DIRECT and DIRECT.

ROOM EQ:

This sets the frequency response of each speaker.

•OFF:

The Equalizer is not used.

•Normal:

Adjust the frequency response of all speaker suitable for general surround system.

•Flat:

Adjust the frequency response of all speakers flat.

•Front:

Adjusts the characteristics of each speaker to the characteristics of the front speakers.

•Manual:

Selects the setting value that was set in the Manual EQ setup.

ENGLISH