ENGLISH

Advanced Setup – Part 2

•The Equalizer setting of “Normal”, “Flat” and “Front” can be selected after performing the Auto Setup.

•When the speaker set as “None” with the Auto Setup is change to on manually, the equalizer of “Normal”, “Front” and “Flat” cannot be used.

•The Equalizer setting can be selected by SURROUND PARAMETER button.

•When headphone is connected, the Room EQ cannot be used.

Setting the Direct Mode Setup

Perform the ON/OFF setting of Room EQ when the surround mode is “Direct” or “Pure Direct”.

1 Press the CURSOR D or H button to select “Direct Mode Setup” at the “Auto Setup/Room EQ” menu, then press the ENTER button.

•The “Direct Mode Setup” screen appears.

 

Press the CURSOR F or G button to select “ON”

2 or “OFF”.

3

Press the ENTER button to enter the setting.

 

 

• The “Auto Setup/Room EQ” menu appears.

Check the EQ parameter

•The frequency characteristic of each speaker is rectified and the tone of the speaker is unified.

•The EQ parameters that were set in Auto Setup can be checked.

•This item is automatically displayed, after the measurement result of the “Auto Setup/Room EQ” is decided.

1 Press the CURSOR D or H button to select “EQ

Parameter Check” at the “Auto Setup/ Room EQ” menu, then press the ENTER button.

•The “EQ Parameter Check” screen appears.

2 Press the CURSOR D or H button to select the equalizer curve, then press the ENTER button.

•The parameter screen appears.

3 Press the CURSOR F or G button to select the speaker channel.

4 Press the ENTER button to enter the setting.

51

Advanced Setup – Part 2

5 If the check ends, press the CURSOR D or H button to select “Exit”, then press the ENTER button.

•The “Auto Setup/Room EQ” menu appears.

6 Press the CURSOR D or H button to select “Exit”, then press the ENTER button.

•The “System Setup” menu appears.

ENGLISH