Advanced Setup – Part 2
Setting the Direct Mode Setup |
| Check the parameter |
ENGLISH
Advanced Setup – Part 2
Set the ON/OFF setting of Room Equalizer, in the case of the surround mode is in “DIRECT” or “PURE DIRECT”.
1 Press D H to select “Direct Mode Setup”, then press
ENTER.
2 Press F G to set.
ON, OFF:
Select “ON” to use the room equalizer, “OFF” if you do not want to use it.
3 Press ENTER.
1
2
The results of the measured items can be checked.
This item is displayed, after the measurement result of the “Auto Setup” is decided.
1 Press D H to select “Parameter Check”, then press
ENTER.
2 Press D H to select the item, then press ENTER.
For instructions on checking the results of each item ( 
page 12).
3 Press D H to select “EQ Parameter Check”, then press ENTER.
4 Press D H to select the type of equalizer, then press
ENTER.
5 Press F G to select the speaker.
1
2
3
4 
5 
•To reset:
Press D H to select “Restore” at the “Parameter Check” screen, then press F.
64
ENGLISH