Advanced Setup – Part 2

Setting the Channel Level

Set the volume of the various speakers so that the sound output from the speakers and the subwoofer seems to have the same volume level.

1 Press D H to select “Channel Level”, then press ENTER.

2 Press F G to set.

Auto:

Adjust the level while listening to the test tones produced automatically from each speaker.

Test tones are automatically emitted from each speaker.

Manual:

Adjust with the speaker from which the test tone is output switched manually.

3 Press D H to select “Test Tone Start”, then press F to select “Yes”.

4 When “Auto” mode is selected: Press F G to adjust the volume.

-1• Test tones are output automatically, in the order shown below.

FL C FR SR

(2 speakers)

SW SL SBLSBR

 

(1 speaker)

SB

 

The volume can be adjusted within the range –12.0 dB to +12.0 dB.

4 When “Manual” mode is selected:

Press D H to select the speaker, then press F G to -2adjust the volume.

5 Press ENTER.

1

2

3

4

-1

•To cancel the setting, press H and select “Level Clear”, then press F and select “Yes”.

•To adjust the channel level separately for the different play modes after setting the channel level, perform the operation on page 36.

62

ENGLISH

Advanced Setup – Part 2

¢Adjusting the test tone using the remote control

unit

Adjustment of the test tones using the remote control unit is only possible in the “Auto” mode and only valid in the STANDARD (Dolby / DTS Surround) mode. The adjusted levels are automatically stored for the different surround modes.

1 Press [TEST TONE].

• Test tones are output from the different speakers.

2 Press F G to adjust the volume.

3 Press [TEST TONE].

ENGLISH