F G, ENTER

ENGLISH

Advanced Setup – Part 2

D H

ENTER

D H F G

ENTER

D H F G

[TEST TONE]

About the button names in this explanation

<> : Buttons on the main unit

[

] : Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

Speaker Setup

•If the “Auto Setup” procedure has already been performed, there is no need to make this setting.

•Perform this setting if you wish to make the settings for your speaker systems manually.

Setting the Speaker Configuration

Automatically set the output component and properties for the various channels according to the combination of speakers to be actually used for surround playback.

1 Press D H to select “Speaker Setup”, then press

ENTER.

2 Press D H to select “Speaker Config.”, then press

ENTER.

3 Press D H to select the speaker, then press F G to set.

Large:

Select this when using large speakers with ample low frequency reproduction capabilities.

Small:

Select this when using small speakers without ample low frequency reproduction capabilities.

None:

Select this when no speaker is connected.

Yes / No:

Select “Yes” when a subwoofer is connected, “No” when no subwoofer is connected.

2spkrs / 1spkr:

Select the number of surround back speakers.

A subwoofer with sufficient low frequency playback capability can better handle deep bass than most main and surround speakers, and the system’s overall performance will be greatly enhanced when “Small” is set for the main (front) and surround speakers. When “Front” is set to “Small”, “Subwoofer” is automatically set to “Yes”, and when “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.

4 Press ENTER.

1

2

3

h

Center speaker

Front speaker

Subwoofer

Surround speaker

Surround back speaker

•Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity for playing low frequency (bass sound below the frequency set for the Crossover Frequency) signals. If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.

60

ENGLISH