ENGLISH

Advanced Setup – Part 2

Setting the Subwoofer Setup

Select the method of playback of the subwoofer for playing the low bass signals.

1 Press D H to select “Subwoofer Setup”, then press

ENTER.

2 Press F G to set.

LFE:

For any channel(s) that are set to “Large”, low frequencies in that channel’s corresponding source are directed to that loudspeaker only. The low frequencies played from the subwoofer are only the LFE signals and the low frequencies of channels set to “Small”.

LFE+Main:

Advanced Setup – Part 2

Setting the Distance

 

 

1

This parameter is for optimizing the timing

with which the audio

2

signals are produced from the speakers and subwoofer according to

 

the listening position.

 

 

 

Preparations:

 

 

 

Measure the distances between the listening position and the

 

speakers (L1 to L8 on the diagram at the below).

3

FL

C

FR

 

..... L1

..... L2

..... L3

..... L4

SW

L3

L1 L2

Low frequencies from speaker channels that have been set to “Large” are reproduced from those speakers as well as from the

L4

Listening position

..... L5

..... L6

subwoofer(s).

3 Press ENTER.

1

2

•The subwoofer mode setting is only valid when and “Yes” is set for the subwoofer in the “Setting the Speaker Configuration”.

•Select the “LFE+Main” mode if you want low frequency signals to always be played from the subwoofer channel.

•Select the mode achieving a voluminous bass sound when playing music or movie sources.

 

L5

 

L6

SL

L7

L8

SR

SBLSBR

1 Press D H to select “Distance”, then press ENTER.

2 Press F G to select “Meters” or “Feet”.

3 Press D H to select the speaker, then press F G to set.

4 Press ENTER.

61

..... L7

..... L8

•Press D to select “Step”, then press F G to change the amount of variation if so desired.

•The distance changes in units of 1 foot (0.1 meters) or 0.1 foot (0.01 meters) each time the button is pressed. Select the value closest to the measured distance.

•Please note that the difference of distance for every speaker should be 20 ft (6.0 m) or less. If you set an invalid distance, a CAUTION notice, such as screen right will appear. In such cases, move the appropriate speaker to the position of the displayed value.

ENGLISH