ENGLISH

Control Remote Playback Setup Connections Started Getting

Multi-zone

ZONE2 out Connections

If another pre-main (integrated) amplifier is connected, the ZONE2 out connectors can be used to play a different program source in ZONE2 the same time (vpage 54 ~ 57).

Pre-main amplifier

(ZONE2)

"6%*0

"6%*0

*/

-3

L R

L R

Connecting the Power Cord

Wait until all connections have been completed before connecting the power cord.

Power cord

To household

power outlet

 

 

(AC 120 V, 60 Hz)

Connection to the AC outlets

• These outlets supply power to external audio devices.

• The power supplied from these outlets turns on and off together with the set’s power switch.

• Audio equipment with a total power consumption of 120 W (1 A) can be connected.

Troubleshooting Information Zone-Multi

NOTE

• Insert the AC plugs securely. Incomplete connections could cause noise.

• Only use the AC outlets to plug in audio devices. Do not use them as power supplies for hairdryers or anything other than audio equipment.

Once Connections are Completed

Turning the Power On (vpage 43)

"69

Input

Output

 

065

 

 

Extension jack for future use.

Infrared

 

Infrared

retransmitter

 

sensor

 

NOTE

•For the audio output, use high quality pin-plug cords so that no induction humming or noise is produced.

•For instructions on installing and operating separately sold devices, refer to the respective devices’ operating instructions.

•To conduct multi-zone playback, see“Amp Assign / Multi-zone Connections and Operations” (vpage 54 ~ 57).

19