Denon DCD-F102 A 01-09 -02:40

System Operations System Operations

ENGLISH

•This function lets you record onto cassette tapes with automatic

editing according to the length of the tape.

•Load the CD and cassette tape before starting.

Edit function

Turn on the powerof the various components.

Press MENU/SET three times in a row.

•“EDIT” is displayed on the receiver’s display.

Use [9] to set the length of the cassette tape.

Example: To record onto a 60-minute cassette tape, use [9]to

select “C-60”.

C – 46 C – 60 C – 90 C –

(The length of the cassette tape is the total length for sides A and B.)

•When the length of the cassette tape is set, the display alternates

between the track numbers to be recorded and the remaining time

for side A and the track numbers to be recorded and the remaining

time for side B.

A 01-09 -02:40

Track number Remaining time

Press CD 1/3.

•Recording of the CD starts.

¢Setting a specific cassette tape length:

When “C –” is displayed, use [NUMBER] (1 ~ 10, +10) to input the

time.

Example: To set to 54 minutes

[+10][+10] [+10] [+10] [+10] [4]

The length can be set to up to 99 minutes.

NOTE:

•The editing function does not work with discs containing 26

tracks or more.

•When using the edited recording function, be sure to load the

cassette tape with side A facing upwards. The beginning of the

cassette tape is found automatically before recording starts.

•When using a tape that is already recorded on, erase the tape

before conducting edited recording.

•When using the edited recording function, set the cassette

deck’s reverse mode to “ ”.

•In some cases it may not be possible to record all the tracks on

the cassette tape even if its length is longer than the total length

of the tracks on the disc, due to the fact that the tracks must be

divided between sides A and B. “OVER” is displayed on the

DCD-F102’s display if there are tracks that cannot be recorded. If

“OVER” is displayed, change the length of the cassette tape as

described in step 3.

•When the editing function is in use, no buttons other than

<ON/STANDBY>, MENU/SET, [9], CD 1/3, CD 2, <TAPE 2>and

[TIME/DISPLAY]will operate.

•With edited recording, blank sections approximately 4 seconds

long are automatically created between tracks. If you do not want

these blank sections, do not use edited recording.

•Edited recording is not possible with discs containing files in MP3

or WMA format.

Editing canceled

¢Canceling the editing function:

Press CD 2 or <TAPE 2>.