7
Top panel
e Mixer part
For buttons not explained here, see the page indicated in parentheses ( ).
Q3
Q4
Q5
Q6
W0 Q9 Q8 Q7 Q8 W0Q9
Q2o Q1Q0 o
q
w
r
e
t
y
u
i
q MIC input level adjustment knob
(MIC 1/2 LEVEL) ··········································(17)
w MIC ON/OFF switch button
(MIC ON 1/2) ···············································(17)
e Ducking ON/OFF switch button
(DUCKING) ··················································(17)
Automatically attenuates the master output
level when MIC input is detected.
r Echo ON/OFF switch button
(ECHO ON 1/2) ············································(17)
• Switches the MIC echo ON/OFF.
• This can be set separately for MIC 1 and MIC
2.
t Post ON/OFF switch button
(POST) ·························································(17)
With this ON, the MIC audio is mixed together
with the master audio from the booth/send
output terminal and record output terminal.
y Split CUE ON/OFF switch button
(SPLIT CUE) ·················································(18)
With this ON, the left channel of the headphone
outputs the monaural CUE audio and the right
channel the monaural master audio.
When off, the master output and CUE output
are heard in stereo.
u PAN adjustment knob (PAN) ····················(18)
Adjusts the balance for the CUE and master
output to the headphone.
i Headphone output level adjustment knob
(PHONES) ···················································(18)
o Channel fader knob ····································(17)
Adjusts the mixing level for input channels.
Q0 Level meter display change switch
(CH2/3, CH1/4, MASTER)
Selects the channel displayed for the level meter
from three display modes.
CH2/3:
• The left channel displays the CH2 level and the
right channel the CH3 level.
• When the channel input source switch knob is
set to LINE1 (LINE2), the volume level for the
external input source is displayed.
• When the channel input source switch knob
is set to USB1/2 /MIDI (USB3/4 /MID), the
volume level for the USB audio input is
displayed.
CH1/4:
• The left channel displays the CH1 level and the
right channel the CH4 level.
• The displayed source differs according to the
channel input source switch knob position.
• When the channel input source switch knob is
set to AUX1/2 or LINE1/2, the volume level for
the external input source is displayed.
• When the channel input source switch knob is
set to MIDI, the volume level on DJ software
is displayed.
MASTER:
• Displays the volume level for the master
output audio (L/R).
Q1 Channel/master level meter
Displays the output level for the channel
selected with the level meter display change
switch.
Q2 Cross fader knob (A/B) ·······························(17)
Adjusts the output balance at the channel level.
Q3 Booth/send output source selection knob
(ASSIGN)
Selects the source to output from the booth/
send output terminal.
Q4 Booth/send EQ adjustment knob
(HI/ LOW)
Adjusts the frequency characteristics for signals
that are output from the booth/send output
terminal.
Q5 Booth/send output level adjustment knob
(LEVEL)
Adjusts the output level for signals that are
output from the booth/send output terminal.
Q6 Master output level adjustment knob
(MASTER LEVEL) ········································(17)
Adjusts the output level for the master output
terminal.
Q7 Channel input source switch knob ···········(17)
Selects the input source for each channel.
Q8 Channel input level adjustment knob
(LEVEL) ························································(17)
Q9 Channel isolator EQ adjustment knob
(HI/MID/LOW) ·············································(17)
Adjusts the frequency characteristics for the
input signal for each channel.
Setting this to the center position makes the
frequency characteristics flat.
W0 Channel CUE button
(CUE CH1-4) ··········································(18, 19)
Outputs the source of the channel selected with
the CUE button to the headphone after monitor
mix.