9
NOTE
• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Insert the plugs securely. Loose connections will result in the generation of noise.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Connect the cables to the correct input and output terminals.
• Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
Preparations
Cables used for connection
Select the cables according to the equipment being connected.
nFor RCA input terminals
R
L
R
L
RCA pin plug cable (sold separately)
nFor XLR input/output terminals and Balanced MIC input
Balanced cable (sold separately)
nFor USB terminal
USB cable (supplied)
nFor coaxial MIC input
Coaxial cable for MIC (sold separately)
nFor booth/send output terminals
Balanced phone plug cable (sold separately)
Connections
Input terminal connection
Connecting external devices and MIC
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
AUDIO
RL
OUT
SIGNAL
GND
AUDIO
RL
OUT
AUDIO
RL
OUT
AUDIO
RL
OUT
External
device 2 Turntable 1CD player 1
External
device 1
When connecting devices
other than a turntable, set
the input change switch to
“LINE”.
When connecting
a turntable, set the
input change switch to
“PHONO”.
Balanced
MIC
Coaxial
MIC
nBalanced MIC connection
Connect a microphone to this balanced jack using an XLR connector.
Pin layout:
1. Ground (GND)
2. Hot (HOT)
3. Cold (COLD)
Suitable connector:
Cannon XLR-3-12C or equivalent.