14PRESET

1.Preset mode

q The preset mode is available when !7PRESET button is pushed for more than 1 sec while DN-S1000 is in Cue, pause or no disc mode.

w Turn the @3PARAMETERS knob to select the preset item.

e After selecting an item, push the @3PARAMETERS knob to select the preset data. r To change other Preset items, repeat these steps.

t Push the !7PRESET, i CUE or y PLAY / PAUSE (13) button to exit from the Preset mode.

2.Preset items and data

The “*” mark next to the data indicates the default value.

(1)Auto Cue : Auto Cue level search on/off. (A Cue ON* / A Cue OFF)

(2)Next Track : Cross_OFF / Cross1sec / Cross2sec* / Cross3sec

Select the time for fading out the currently playing track when playback of a new track is started with the next track function.

(3)S-Stroke (SCRATCH STROKE) : Short*/Long

Allows you to select a comfortable stroke distance for scratching “Long” is set for wide pattern strokes and “Short” is set for small pattern strokes.

(4)Scratch : Delay_OFF* / Delay -1- / Delay -2- / Delay -3-

Select the time after which the normal play or pause mode is set after scratch play stops.

(5)Jump Time : Jump10sec* / Jump20sec / Jump30sec / Jump1min Select the skip time of Quick Jump.

(6)P. Range (PITCH RANGE) : 4% Range / 10% Range* / 16% Range / 24% Range Select the playing pitch range when the power is turned on.

(7)EOM Time : Track end message start time.

(EOM OFF / EOM 10 sec* / EOM 15 sec / EOM 20 sec / EOM 30sec / EOM 60 sec / EOM 90 sec)

(8)Total Time : Total ON / Total OFF* Total time display on / off.

(9)Fader Mode (FADER START MODE) : Play / Cue* / Play / Pause

Select 2-line type (Cue and Play) or 1 line type (Play and Pause).

(10)Power Play (POWER ON PLAY) : P. Play ON / P. Play OFF* Playback starts when the power is turned on if a disc is loaded.

(11)Pitch : Pitch ON* / Key AdjON (KEY ADJUST ON) / Pitch OFF Select the pitch mode when the power is turned on.

(12)Play Mode (SINGLE / CONTINUOUS / SINGLE PLAY LOCK) : Single / Cont. / Play Lock* Select the play mode when the power is turned on.

(13)Time Mode (ELAPSED / REMAIN) : Elapsed* / Remain Select the time mode when the power is turned on.

(14)Memo Clear (MEMO ALL CLEAR) :

Clear all MEMO data in the non-volatile memory.

q To clear all MEMO data, push the PARAMETERS knob.

• “Clear OK?” flashes on the character display.

wPush the PARAMETERS knob again and select “OK” to execute clearing all MEMO data.

• “Memo Clear” is displayed on the character display while clearing.

eOnce clearing is completed, “Complete!” is displayed.

(15)Version No. : The DN-S1000’s software version is displayed. (SYSTEM / DSP)

ENGLISH

(16)Preset Int.(PRESET INITIALIZE) : Set all the preset data back to the factory defaults. q To clear the PRESET data, push the PARAMETERS knob.

“Initial OK?” flashes on the character display.

w Push the PARAMETERS knob again and select “OK” to start clear the preset data. “Preset Int” is displayed on the character display while data clearing.

e Once clearing is completed, “Complete!” is displayed.

19