USB port REC

START

Recording

Recording to a USB Flash Drive

1Prepare the analog record you want to record for playing (vpage 5 “Preparing to Play a Record”).

qPlace the record on the rubber mat.

wSet the record’s playing speed.

eSet the record’s size.

rTurn the power on.

2Insert a USB flash drive into the USB port. The USB indicator lights green.

bIf the USB flash drive has a write protection switch, make sure that it is in the unlocked position.

3Press REC.

•The Recording indicator lights red (preparing to record).

•The Recording indicator blinks red and recording starts.

bThe time from pressing REC (the recording indicator lights red) to when recording starts (the red light blinks) varies with the USB flash drive capacity and type. Check the time to start of recording beforehand.

4Press START.

bIf you are starting the record manually, use the finger lift to move the tone arm to the position at which you want to start playing and lower it carefully.

NOTE

•When removing the USB flash drive, gently hold the DP-200USB with your other hand to keep it steady.

•Do not remove the USB flash drive during recording.

nTo Stop Recording

Press REC.

• The Recording indicator turns off.

The included “Trans Music Manager” can be used to delete silent sections recorded before and after a track.

qCreate a single track from the section to be deleted. “Manual MP3 Splitter” (vBrief manual (CD-ROM) page 11)

wDelete the track created in step q.

“Deleting tracks” (vBrief manual (CD-ROM) page 28)

Editing

Shall be Enabled byTrans Music Manager for DENON

You can use Trans Music Manager to perform the following functions.

nFile Splitter

•Auto MP3 Splitter

•Manual MP3 Splitter

nMusicID (Addition of track information)

•Track name, Artist name, Album name, etc.

•Access Gracenote® on the internet

•Character Entry

nFile deletion

ENGLISH

Trans Music Manager is a trademark and registered trademark of

Getting

 

Trans Technology, Inc.

 

Information concerning music identification technology is offered

Started

by Gracenote, Inc.

 

Gracenote® and CDDB® are registered trademarks of Gracenote.

Connections

About Gracenote MusicIDSM Music Recognition

 

Service

 

 

“Gracenote MusicIDSM music recognition service” is a service offered

Playback

by Gracenote® that is commonly known as CDDB®.

names, etc., in text format by connecting to the Gracenote® server

The service lets you automatically obtain CD titles, artist names, track

 

on the Internet.

 

Recording

 

 

Recommended System Requirements

 

 

and

for Using Trans Music Manager

 

 

Editing

• A personal computer running Windows 2000/Windows XP/

 

Windows Vista

 

Troubleshooting

• An HDD with a minimum of 30 MB free space

• A USB 2.0 port

 

 

 

 

Installing “Trans Music Manager”

 

 

b If the top menu screen is not displayed, open the CD-ROM drive

 

Specifications

Insert the included CD-ROM (Trans Music Manager)

 

 

1in your PC.

 

 

The top menu screen is displayed.

 

 

under “My Computer” and start “TMMLaunch.exe”.

 

 

 

 

 

 

Click on “Trans Music Manager installation”.

 

 

2The InstallShield Wizard screen is displayed.

 

 

Operate while reading the screen explanations.

 

 

3Installation starts.

 

 

Click on “Finish”.

 

 

4Installation finishes.

 

 

 

 

 

Editing with Trans Music Manager

 

 

For details of the editing operation, refer to the “Simple User’s Guide”

 

 

which is included on the CD-ROM supplied with the DP-200USB.