
4 | 2 | |||||
Rubber mat | ||||||
|
|
|
|
| Platter | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Center spindle | 1 |
Equalizer switch
ON OFF
3
Before assembly, remove all packaging material except for the plastic tie securing the tone arm and open the dust cover. Leave the plastic tie securing the tone arm until assembly is complete.
1Set the equalizer switch to the appropriate position for the type of input terminal on the device connected to the
ON : When connecting to an AUX input terminal or an input terminal other than “PHONO” (default setting at time of purchase).
OFF : When connecting to a PHONO input terminal.
2Mount the platter on the center spindle.Turn the platter so that the drive roller is visible through the opening in the platter.
3Take hold of the ribbon tape attached to the drive belt on the underside of the platter and hook the drive belt onto the driving roller.
•Remove the ribbon tape after hooking the belt onto the roller.
•Turn the platter by hand until the drive belt is positioned at the center of the driving roller.
4Place the rubber mat on the platter.NOTE
If the equalizer switch is not set correctly, the sound will be extremely weak or distorted.
| ENGLISH |
| |
Changing the Stylus | Getting | ||
The stylus supplied with the | |||
Started | |||
400 hours. Be sure to replace it in good time to avoid damaging your | |||
precious records. |
| ||
n Before replacing the stylus | Connections | ||
Unplug the player at the wall socket. | |||
| |||
Removing the Replaceable Stylus | Playback | ||
Hold the cartridge steady with one hand, grasp the stylus | |||
| |||
with the other hand, push down in the direction of arrow |
| ||
q and then gently pull the stylus off in the direction of | andRecording | ||
arrow w. |
| ||
|
| ||
| Cartridge |
| |
1 |
| Editing | |
|
| ||
2 | Stylus | Troubleshooting | |
| |||
Stylus cover |
| ||
|
| ||
Mounting the Replaceable Stylus | Specifications | ||
direction of arrow q and insert it fully into the long | |||
Hold the cartridge steady with one hand, grasp the stylus |
| ||
with the other hand, point the catch on the stylus in the |
| ||
opening in the cartridge, then push up in the direction of |
| ||
arrow w until it clicks. |
|
2
Ribbon tape
Driving roller
Drive belt
Platter
1 Cartridge

Stylus
Stylus cover
nCleaning the tip of the stylus
The tip of the stylus is extremely delicate and should be handled with great care. Use a soft brush to gently remove any dust from the tip.