English
–15 –EN
During playback, press the
STILL/PAUSE button.
• Playback will pause and sound
will be muted.
The disc advances by one frame each time the
STILL/PAUSE buttonis pressed.
To exit step by step playback, press the PLAY but-
ton.
3
2
1
DVD-V
Step by Step Playback
During playback, press the
STILL/PAUSE button.
• Playback will pause and sound
will be muted.
To continue playback, press the PLAY button.
2
1
WMAMP3CDDVD-V
Pause Getting started
• Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
• Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
Press the POWER ONbutton.
• “P-ON” will appear briefly on the display panel.
Press the OPEN/CLOSE button to open disc load-
ing tray.
Place the disc in the tray, with the
label facing up.
Press the PLAY button.
• The tray will close automatically, and playback will then
start from the first chapter or track of the disc.If the
playback does not start automatically, press the PLAY
button.
• When you playback the DVD with a title menu is
recorded, it may appear on the screen.In this case,
refer to “TITLE MENU”.
Press the STOPbutton to stop playback.
NOTES:
• A “prohibited icon”may appear at
the top-right on the TV screen
during operation, warning that a
prohibited operation has been
encountered by the DVD player or
the disc.
• With DVDs that use some titles
for playback program signals, playback may start from
the second title, or it may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment.This happens when the 1st layer
switches to the 2nd layer.This is not a malfunction.
• During the playback of a DVD-RW which has been
recorded in the VR mode, the sound or picture may
freeze momentarily depended on disc content.
5
4
3
2
1
CDDVD-V
Press the MENU button.
• The DVD main menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press the cursor buttons( L / K / B / s) to select
an item, and the ENTER button to confirm selec-
tion.
4
3
2
1
DVD-V
PLAYING A DISC
Basic PlaybackDisc Menus
DVD may contain menus to navigate the disc and access
special features.Press the appropriate numerical key or use
the cursor buttons( L / K/ B / s) to highlight your selec-
tion in the DVD main menu and press the ENTERbutton to
confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use.Some operations can be carried
out using the menu bar on the TV screen.
General Features
Press the TOP MENU button.
• The title menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
Press the cursor buttons( L / K / B / s) to select
an item, and the ENTER button to confirm selec-
tion.
• Playback will begin at the selected Title.
3
2
1
DVD-V
Title Menu
• Press the MENUbutton to call up the DVD main menu.
• Press the TOP MENUbutton to call up the title menu.
NOTE:
• Contents of menus and corresponding menu opera-
tions may vary between discs.Refer to the manual
accompanying the disc for details.
DVD-V
CALLING UP A MENU SCREEN DURING PLAYBACK
F
F
Press the DIMMER button on the front panel to
select the desired brightness of the front display.
(Bright, Dim, or OFF)
• “Bright” has been selected as the factory default.
NOTE:
• The brightness of the front display can be adjusted
from the SETUP menu.Details are on page 24.
1
Brightness of the Front Display
E57E0_EN.QX33 03.4.18 19:32 Page 15