37

Getting Started Connections
Basic Operations Advanced OperationsAdvanced Operations TroubleshootingExplanation termsInformation Specifi cations Index
ENGLISH

Using the cursor buttons

1
Display the screen for inputting characters
.
2Use o p to set the cursor to the character you want
to change.
3Use ui to change the character.
• The types of characters that can be input are as shown below.
G Upper case charactersH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH
abcdefghijklmnopqrstuvwxyz
GSymbolsH! “ # $ % & ‘ ( ) z + , - . / : ; <
= > ? @ [ \ ] ^ _ ` { | } ˜
GNumbersH0123456789 (Space)
• The input character type can be switched by pressing [MODE]
while the display name is being changed.
nOther buttons
• Press [8] to delete the character.
• Press [9] to insert a space.
4Repeat steps 2 and 3 to change the name then press
[ENTER] or <1/3
ENTER
> to register it.

Auto power on

When the power is in standby, the power turns on when any of
the buttons below other than ON/STANDBY is operated, and the
respective operation is performed.
<5> ...............The disc tray opens.
[1/3] ............Playback of the “CD”, “iPod” or “USB” starts.
[TUNER] ........Playback of the tuner starts.
[CD] ............... The input source switches to “CD” and the disc starts
playing.
[iPod] ............ The input source switches to “iPod” and the iPod
starts playing.
[USB] ............. The input source switches to “USB” and the USB
starts playing.
Other functions

Last function memory

This stores the settings as they were immediately before going into
the standby mode.
When the power is turned back on, the settings are restored to as
they were immediately before going into the standby mode.

Resetting the microprocessor

Perform this procedure if the display is abnormal or if operations
cannot be performed.
When the microprocessor is reset, all the settings are reset to their
default values.
1Unplug the power cord.
2Plug the power cord into a power outlet while pressing
<VOLUME d> and <VOLUME f> simultaneously.
“Initialized” is displayed.
If “Initialized” does not display in step 2, start over from step 1.