Chapter 2 Getting Started the BHT and System Menu
Cold-booting the BHT
If a problem persists even after warm-booting the BHT, cold-boot the BHT.
Cold-

b

ooting the BHT will erase all data stored in the RAM. It is recommended that important data be

saved into the FLASH folder or uploaded to the host computer.

Cold booting procedure
Turn the BHT off. While holding down the reset button with the stylus, press the power key and then
release them. Press the power key again, and the BHT cold-boots.
Contents of the memory after warm-/cold-booting the BHT
After warm booting After cold booting
Data in the FLASH folder Retained Retained
Data in other folders Retained Erased
Contents of the Registry Retained Erased*
Data being edited Erased Erased
* If the Registry has been backed up, the backup will apply. For the backup procedure, refer to Section
2.3.4, "[2] Backing up the Registry."
Application program to run automatically at warm-/cold-boot
If any execution program file (XXXXXX.exe) is stored in the FLASH\StartUp folder, warm- or
cold-booting the BHT automatically runs that program file.
37